Thingiverse
CellSol ESP32 WiFi Pylon Case for Heltec LoRa32 by Kuprin
by Thingiverse
Last crawled date: 4 years, 5 months ago
This is a simple small case for a CellSol WiFi Pylon built using the recommended Heltec LoRa32 or V2 board. This has room for a small LiPo battery, the LoRa32, and your antenna mount, and has a port for USB.
Using silicone gasket material, silicone paint, and transparent screen protector film we were able to make this case somewhat water resistant but we do not recommend it for unsupervised outdoor use at this time. It's good for a handheld pocket pylon, however.
CellSol (short for Cellular-Solar) is a long range mesh networked communication system designed for last-mile replacement in the event of a disaster or unrest.
More information on CellSol can be found at https://www.f3.to/cellsol
Prints fine at 20% infill PLA or PETG with 0.2mm layers.
Using silicone gasket material, silicone paint, and transparent screen protector film we were able to make this case somewhat water resistant but we do not recommend it for unsupervised outdoor use at this time. It's good for a handheld pocket pylon, however.
CellSol (short for Cellular-Solar) is a long range mesh networked communication system designed for last-mile replacement in the event of a disaster or unrest.
More information on CellSol can be found at https://www.f3.to/cellsol
Prints fine at 20% infill PLA or PETG with 0.2mm layers.