Thingiverse
Ceado e37s Short, Swing-Out Lid, Bean Hopper by Mandryd
by Thingiverse
Last crawled date: 3 years, 5 months ago
This is a shorter hopper for the Ceado e37s Espresso Grinder.
Even the short hopper that comes with this grinder is quite tall and makes adding beans to the hopper quite annoying if you have your grinder underneath cabinets.
I also find it annoying to have to remove the hopper lid while filling beans. So, the design of this is inspired by the little salt containers that have a swing out lid and a magnet closure. The lid of this hopper swings out easily with one hand, then pops back in place and is held shut with magnets.
BOM:
(2) 6mm round diameter by 1.85 mm tall magnets (mine were sold as 6mm x 2mm magnets although the height is slightly lower in reality)
(1) m3x5x4 or m3x5x6 heatset. (https://www.aliexpress.com/item/4000232858343.html)
(1) m3x8 socket head cap screw.
Thread lock compound
Ball end Allen wrenches (there is a pretty tough angle to overcome when tightening the SHCS)
Instructions:
Glue in the magnets. 1 in the lid and one in the funnel. Make sure they are oriented so they will attract each other!
Melt the heatset into the lid with a soldering Iron.
Insert the the m3x8 upwards in the funnel. Apply some threadlock compound to the thread, then attach the lid and tighten so the lid can still swing.
Enjoy!
I printed this in ABS with the fat side of the funnel down and the bottom of the lid down. The top of my lid was done with hilbert curve (to get the cool effect). I also acetone smoothed the inside of the funnel to keep little grounds from collecting and making it easier to clean.
Even the short hopper that comes with this grinder is quite tall and makes adding beans to the hopper quite annoying if you have your grinder underneath cabinets.
I also find it annoying to have to remove the hopper lid while filling beans. So, the design of this is inspired by the little salt containers that have a swing out lid and a magnet closure. The lid of this hopper swings out easily with one hand, then pops back in place and is held shut with magnets.
BOM:
(2) 6mm round diameter by 1.85 mm tall magnets (mine were sold as 6mm x 2mm magnets although the height is slightly lower in reality)
(1) m3x5x4 or m3x5x6 heatset. (https://www.aliexpress.com/item/4000232858343.html)
(1) m3x8 socket head cap screw.
Thread lock compound
Ball end Allen wrenches (there is a pretty tough angle to overcome when tightening the SHCS)
Instructions:
Glue in the magnets. 1 in the lid and one in the funnel. Make sure they are oriented so they will attract each other!
Melt the heatset into the lid with a soldering Iron.
Insert the the m3x8 upwards in the funnel. Apply some threadlock compound to the thread, then attach the lid and tighten so the lid can still swing.
Enjoy!
I printed this in ABS with the fat side of the funnel down and the bottom of the lid down. The top of my lid was done with hilbert curve (to get the cool effect). I also acetone smoothed the inside of the funnel to keep little grounds from collecting and making it easier to clean.
Similar models
thingiverse
free
Ceado E5P Grinder Lid by mjv45
...n the beans you want to grind for a single dose and includes a lid so you are not running the grinder without some sort of cover.
thingiverse
free
Mazzer Major hopper funnel and plunger by portergieske
...ch the spinning axle top that is at the bottom. all of the beans are fed into the burrs more quickly and without popping around.
thingiverse
free
Rok grinder lid, with funnel! by ninjapigeon
...d-grade", but as this mostly just keeps the beans from bouncing out, i'm not worried about getting plastic in my coffee.
thingiverse
free
Mahlkonig EK43 Coffee Grinder Tiny Bean Hopper by eric_chu
...mahlkonig ek43 coffee grinder tiny bean hopper by eric_chu
thingiverse
mahlkonig ek43 coffee grinder tiny bean hopper
thingiverse
free
1/2" Funnel by Dedcos
...e it, so it works at different sizes of tubes. it should be printed upside down, threading upside. i hope it will help you too :)
thingiverse
free
Etzinger ETZMAX Single Dose Funnel/Hopper
...s a square version of this hopper, which fits better to the form factor of the grinder: https://www.thingiverse.com/thing:3986571
thingiverse
free
Coffee Grinder Mini Hopper by zafrirron
...d couple of mini hoppers, each hopper holds about 3 doses of beans. i label each hopper with the coffee type and recipe details..
thingiverse
free
+Deksel by VanAllesWatOntwerp
...funnel with your own coffee beans. saving you money and saving the environment from hundreds of thrown-away plastic bean-funnels!
thingiverse
free
Jura ENA 9 Coffee Maker Bean Hopper Extension by LiquidTick
...isting hopper and not fall into the grinder. the new hopper creates more back pressure and thus less bridging.
enjoy your coffee!
thingiverse
free
Coffee Bean Hopper for Anfim CODY Grinder by carbochip
...l (https://www.thingiverse.com/thing:66824) to act as a lid to prevent beans from jumping out (and other things from jumping in).
Ceado
thingiverse
free
Ceado E37SD Chute by ufergus
...s. i usually request 40% infill and use black pla.
leave me a comment if you have an idea on how to improve the chutes. thanks.
thingiverse
free
Ceado E5P Grinder Lid by mjv45
...n the beans you want to grind for a single dose and includes a lid so you are not running the grinder without some sort of cover.
thingiverse
free
Tidy Tamping Station by otim
...ecm portafilter with angled handle perfect to stack my ceado funnel on top which holds my motta leveling tool...
Mandryd
thingiverse
free
Esteps Helper Filament Holder by Mandryd
...suring.
the notch marks 100mm.
slide your filament into the slot, then put one jaw of your calipers on the raised lip...profit!
thingiverse
free
Lelit Bianca Portafilter Stand Balanced for Scale by Mandryd
... portafilter then weigh the beans with the portafilter).
balanced so the portafilter will rest without having to hold the handle.
thingiverse
free
Espresso E61 Shaker Redistribution Dosing Cup by Mandryd
... as much to the cup.
update 10/24/2020:
added a taller version (40mm).
update 12/28/2020:
added an even taller version (60mm)
thingiverse
free
Filament guide for dry box, with o-ring screw cover IMPROVED VERSION (STP files included)
...so a ptfe tube can be connected: madewithlinux's remix:https://www.thingiverse.com/thing:3850124 mandryd#39;s remix using a pc4-m10-0.9 coupler (includes threads for the...
E37S
sketchfab
$39
Mecca and the Red Sea Saudi Arabia - n19 e37
... 3d model nor the supplied maps! - mecca and the red sea saudi arabia - n19 e37 - buy royalty free 3d model by gobotree-3d-assets
thingiverse
free
Stream Deck Medium - Button Box - dual rotary encoder by PeterWdorf
...&cpath=94&products_id=205
https://www.amazon.de/gp/product/b07hxn2m7z/ref=ppx_yo_dt_b_search_asin_title?ie=utf8&psc=1
cg_trader
$99
NEOM city topography Saudi Arabia - tile n25 e37
...neom city topography saudi arabia - tile n25 e37
cg trader
saudi arabia topography neom by gobotree
cg_trader
$99
Mecca and the Red Sea coast of Saudi Arabia - tile n19 e37
... red sea coast of saudi arabia - tile n19 e37
cg trader
terrain model of the mecca region and the red sea coast of saudi arabia.
cg_trader
$99
Mecca and the Red Sea coast of Saudi Arabia - tile n20 e37
... red sea coast of saudi arabia - tile n20 e37
cg trader
terrain model of the mecca region and the red sea coast of saudi arabia.
cg_trader
$99
Mecca and the Red Sea coast of Saudi Arabia - tile n24 e37
... red sea coast of saudi arabia - tile n24 e37
cg trader
terrain model of the mecca region and the red sea coast of saudi arabia.
cg_trader
$49
Mecca and the Red Sea coast of Saudi Arabia - tile n21 e37
... red sea coast of saudi arabia - tile n21 e37
cg trader
terrain model of the mecca region and the red sea coast of saudi arabia.
cg_trader
$99
NEOM city topography Saudi Arabia - tile n27 e37
...r development. the line, a revolution in urban living at neom, and a blueprint for how people and planet can co-exist in harmony.
cg_trader
$99
NEOM city topography Saudi Arabia - tile n30 e37
...r development. the line, a revolution in urban living at neom, and a blueprint for how people and planet can co-exist in harmony.
Hopper
3d_export
$5
hopper
...hopper
3dexport
hopper
design_connected
$16
Hopper
...hopper
designconnected
minotti hopper lounge chairs computer generated 3d model. designed by rodolfo dordoni.
turbosquid
$73
Hopper
...
turbosquid
royalty free 3d model hopper for download as obj on turbosquid: 3d models for games, architecture, videos. (1464144)
turbosquid
free
hopper
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Extremis HOPPER
... hopper , скамья
высота: 750мм
ширина: 2400мм
глубина: 690мм
3d_export
$6
hopper roller conveyor
...hopper roller conveyor
3dexport
hopper roller conveyor
turbosquid
$6
twister hopper
...uid
royalty free 3d model twister hopper for download as stl on turbosquid: 3d models for games, architecture, videos. (1338460)
turbosquid
$79
Grass Hopper
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$40
Hopper Cars
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Miedema Hopper
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Bean
3d_ocean
$5
caffe bean
...ffe coffe bean coffee drink food hot lowpoly max particle particles systems textured
cafe bean vray render texture and backgraund
3d_export
$5
coffee beans
...coffee beans
3dexport
coffee beans
turbosquid
$1
bean
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Bean bags
...n bags
3ddd
мешок , пуф , bean bag
кресло мешок
3d_ocean
$2
coffee bean
...fee bean
3docean
bean coffe coffee hot beverage
realistic model of cofee bean textured with hi rez maps ready for your projects .
3ddd
$1
Bean bag_Subberjean
...bean bag_subberjean
3ddd
кресло-мешок
bean bag, то бишь бескаркасное кресло.
3ddd
free
Bean
...bean
3ddd
фасоль
скульптура "фасоль"
3ddd
free
Coffee Beans
...coffee beans
3ddd
кофе , зерна
coffee beans
зёрна кофе
polys: 9630/1
3ddd
$1
Bean Bag Chair
... restoration , кресло мешок , мешок
кресло
design_connected
$18
Bean Desk
...bean desk
designconnected
ceccotti collezioni bean desk computer generated 3d model. designed by lazzeroni, roberto.
Swing
archibase_planet
free
Swing
...swing
archibase planet
swing seat swing seat
swing 4 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Swing
...swing
archibase planet
swing swing seat seat
swing 6 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Swing
...swing
archibase planet
swing seat swing seat
swing 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Swing
...swing
archibase planet
swing swing seat seat
swing 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Swing
...swing
archibase planet
swing seat swing seat
swing 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Swing
...swing
archibase planet
swing swing seat seat
swing 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Swing
...swing
archibase planet
swing swing seat seat
swing 1 n280313 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Swing
...swing
archibase planet
swing swing seat seat
swing 2 n280313 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Swing
...swing
archibase planet
swing swing seat playground
swing lappset n051113 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Swing
...swing
archibase planet
swing swing seat playground
swing 2 n230814 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
Lid
3d_export
$5
plastic lid
...plastic lid
3dexport
plastic lid
turbosquid
$4
Sewer lid
...osquid
royalty free 3d model sewer lid for download as blend on turbosquid: 3d models for games, architecture, videos. (1460159)
turbosquid
$15
Lid planter
...y free 3d model lid planter for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1462865)
turbosquid
$1
Bootle (with Lid)
...e 3d model bootle (with lid) for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1362012)
turbosquid
$7
Box Lid
... free 3d model box lid for download as fbx, stl, dae, and obj on turbosquid: 3d models for games, architecture, videos. (1694087)
turbosquid
$30
Sewer Lid
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
SportsBottle4Latches-Lid
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
lid dispenser.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Bucket with lid
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
sewer lid
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Short
3d_ocean
$3
Shorts
...shorts
3docean
3d models clothes & accessories shorts
3d models, clothes & accessories, shorts
turbosquid
free
shorts
...shorts
turbosquid
free 3d model shorts for download as blend on turbosquid: 3d models for games, architecture, videos. (1433959)
3d_export
$5
short foot
...short foot
3dexport
short foot
turbosquid
$15
short
...royalty free 3d model short for download as max, max, and pac on turbosquid: 3d models for games, architecture, videos. (1568324)
turbosquid
$9
Shorts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
pant short
...pant short
3dexport
pant short for cc 3
3d_ocean
$2
Short sword
...sy fentezi for games podhodit short style textured
short blade, textured style fentezi.podhodit for fantasy animations and games!
3d_export
$5
short simple knob
...short simple knob
3dexport
short simple knob
3d_export
$5
short screw clip
...short screw clip
3dexport
short screw clip
turbosquid
$2
Short Table
...urbosquid
royalty free 3d model short table for download as on turbosquid: 3d models for games, architecture, videos. (1324464)