Case for SKR 1.4 (turbo), TFT35 V3.0 on Ender 3 (Pro) by JustinX

Last crawled date: 3 years ago

Housing for a SKR 1.4 (turbo) with TFT35 V3.0, Mosfet and voltage converter on the Ender 3 (Pro).
It is attached to the left of the profile with 4 sliding blocks.
The components are cooled with 2ea 80x80mm fans.
I chose suoer silent fans with a thickness of 10mm, 15mm is also possible, 25mm would have to be mounted on the outside.
The TFT35 V3.0 is attached to the housing with a holder.
The housing for the TFT is available here: https://www.thingiverse.com/thing:3864560
I just had to extend the end stop cable and the power cable, everything else fit.
the housing is built in such a way that the z-end stop should fit, I didn't install one because I installed a BL-Touch.
I printed the housing in PLA +
Fan: https://www.amazon.de/gp/product/B01HTJ78LI/ref=ppx_yo_dt_b_asin_title_o08_s01?ie=UTF8&psc=1
Fan grille: https://www.amazon.de/gp/product/B0040JHMHQ/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Mosfet: https://www.amazon.de/gp/product/B071H6W8S4/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
Converter: https://www.amazon.de/gp/product/B07DS4R5TZ/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1