Case for Sinclair Scientific Calculator Kit by LeFauve

Last crawled date: 3 years, 1 month ago

This is a case for the Sinclair Scientific calculator replica kit from @arduinoenigma.
It replaces the 4 legs provided with the kit (you may use the same screws to attach the case) and allow to hold the calculator in hand more easily.
Note that if you print it in white, it's likely the Arduino's red led will be visible through the case so you may want to unsolder it.
INSTRUCTIONS:
The original file (Sinclair_Scientific_Calculator.stl) is designed for the "Modern display" module and a FDM printer (tested with PLA). It's a tight fit but since the PLA is a little flexible, it should work)
I added the requested "Sinclair Scientific Calculator_BubDisp_extraclearance.stl" which is designed for the vintage "Bubble display" and online printing (with some kind of "plastic" material which is not as flexible than PLA, so it has a more comfortable fit).
Note that the "Bubble display" model should work but I didn't test it since I don't have this version of the kit.
If you want to print the "Modern display" version with online printing or the "Bubble display" with a FDM printer, send me a message and I'll try to add them (note that while the two versions of the kit's PCBs (modern or bubble display) looks very similar, the top screws holes have moved so you need to get the right case)