Case for Raspberry Pi 4 + GeekWorm P165-A + Osoyoo Screen 3.5" by adjuro

Last crawled date: 3 years ago

I needed a case to assemble my Raspberry Pi 4 with the cooling solution from GeekWorm (P165-A) and a DSI screen from Osoyoo (3.53).
The designed is composed by 2 part that are assemble together with 4 M3x20 screws.
Instead of using the screws provided with the P165-A, you need to use 4 M2.5x16 screws.
This way you can assemble both bottom part of the case, the raspberry pi board, the heat sink and the screen all together.
On top of this I remixed the Raspberry Pi camera case from https://www.thingiverse.com/thing:3114849 to be able to mount a camera with the case.
Use again a M3x20 screw and a M3 nut to assemble it.
You might need to do some ribbon cable management to avoid the ribbon touching the fan inside.
Here below the different things you need for this assembly :
https://www.amazon.com/Geekworm-Raspberry-Embedded-Compatible-Expansion/dp/B07Z3Q417K/ref=sr_1_4?dchild=1&keywords=p165A&qid=1622456210&sr=8-4
https://www.amazon.com/OSOYOO-Touchscreen-Raspberry-Capacitive-Compatible/dp/B08634Y16L/ref=sr_1_3?dchild=1&keywords=osoyoo+3.5&qid=1622456229&sr=8-3
https://www.amazon.com/Raspberry-Pi-Camera-Module-Megapixel/dp/B01ER2SKFS/ref=sr_1_3?dchild=1&keywords=raspberry+pi+camera&qid=1622456250&sr=8-3
https://www.amazon.com/gp/product/B07Y6ZZ674/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
5 M3x20 screws
1 M3 nut