Thingiverse
Case for MMDVM Oled with Raspberry Pi Zero an Li-Ion Battery by mason_swiss
by Thingiverse
Last crawled date: 4 years, 7 months ago
Mini Case for MMDVM with Raspberry Pi Zero W and Waveshare Li-Ion Hat.
Between the MMDVM and Raspberry Pi Zero i used the 22mm stands, between the Pi and the Waveshare Li-Ion Hat the 11mm. The stands are printed, but I cut a M3 thread in each.
Temperatur from the whole thing is around 43.3°C / 109.9°F and it runs for about 2 hours with the battery (more or less) but you can run this thing also with a 5V Powersupply.
Parts you need:
1x Raspberry Pi Zero W
1x MMDVM P25 DMR with OLED Display
1x Waveshare Li-Ion Hathttps://www.waveshare.com/li-ion-battery-hat.htm
1x Li-Ion 14500 Battery
4x M3 x 12mm screw
4x M3 x 8mm screw
4x M3 x 6mm headless (between the post's)
1x Antenna
Use at your own risk.
Between the MMDVM and Raspberry Pi Zero i used the 22mm stands, between the Pi and the Waveshare Li-Ion Hat the 11mm. The stands are printed, but I cut a M3 thread in each.
Temperatur from the whole thing is around 43.3°C / 109.9°F and it runs for about 2 hours with the battery (more or less) but you can run this thing also with a 5V Powersupply.
Parts you need:
1x Raspberry Pi Zero W
1x MMDVM P25 DMR with OLED Display
1x Waveshare Li-Ion Hathttps://www.waveshare.com/li-ion-battery-hat.htm
1x Li-Ion 14500 Battery
4x M3 x 12mm screw
4x M3 x 8mm screw
4x M3 x 6mm headless (between the post's)
1x Antenna
Use at your own risk.