Thingiverse
Case for Hyve Touch Synth with battery holder by switchborg
by Thingiverse
Last crawled date: 4 years, 7 months ago
Case for the Hyve Touch Synthesizer, incorporating a 9V battery compartment and mounting hole for a toggle switch.
It is not necessary to modify the Hyve board; there is room for plugging into the stock DC jack.
This case has not been designed for FDM printing; it may work but I haven't tried it and tolerances are very close. Mine was printed with Shapeways "Black Natural Versatile Plastic" which is SLS-printed nylon. (The angle of the STL model is so that the top surface is a flat layer. There is an option in the SCAD to make it flat-bottomed instead.)
Also on GitHub: https://github.com/kpreid/3dp-hyve-case
It is not necessary to modify the Hyve board; there is room for plugging into the stock DC jack.
This case has not been designed for FDM printing; it may work but I haven't tried it and tolerances are very close. Mine was printed with Shapeways "Black Natural Versatile Plastic" which is SLS-printed nylon. (The angle of the STL model is so that the top surface is a flat layer. There is an option in the SCAD to make it flat-bottomed instead.)
Also on GitHub: https://github.com/kpreid/3dp-hyve-case