Thingiverse
Case for 3 Inch Parallels by hwright14
by Thingiverse
Last crawled date: 4 years, 7 months ago
Case with lid for the 4x 3" parallels kit from Little Machine Shop (LMS). Item number 2924.
Use M4 screws and TAP the lower part of the case. Then screw button head M4x20 screws in to provide the hinge. You may need to run a 4mm drill through the hinge on the lid. Snaps closed.
I printed in ABS plastic.Using a Flashforge Creator Pro and Flashprint. 0.25mm compensation to internal diameters. No support needed.
Update: Made more clearance around parralels to account for shrinkage. Use a M4 Tap to create a thread in the base for the hinge.
Use M4 screws and TAP the lower part of the case. Then screw button head M4x20 screws in to provide the hinge. You may need to run a 4mm drill through the hinge on the lid. Snaps closed.
I printed in ABS plastic.Using a Flashforge Creator Pro and Flashprint. 0.25mm compensation to internal diameters. No support needed.
Update: Made more clearance around parralels to account for shrinkage. Use a M4 Tap to create a thread in the base for the hinge.