Thingiverse
Carboy Drying Stand by agmcmll
by Thingiverse
Last crawled date: 4 years, 7 months ago
Simple perforated cylindrical stand that allows a carboy to be set on it inverted, without the top of the carboy touching the floor/sink. The perforations are intended to allow drying.
It is intended to be printed upside down, that way there are no overhangs greater than 45°.
I used ABS, with a 20% infill, and it seems sturdier than necessary.
Here's a timelapse video of the printing: https://youtu.be/p-Xx8uj7Xjc
It is intended to be printed upside down, that way there are no overhangs greater than 45°.
I used ABS, with a 20% infill, and it seems sturdier than necessary.
Here's a timelapse video of the printing: https://youtu.be/p-Xx8uj7Xjc