Thingiverse
![Capresso Grounds Catcher Cup by TaclGuru](/previews/9690038.jpg)
Capresso Grounds Catcher Cup by TaclGuru
by Thingiverse
Last crawled date: 3 years ago
My grounds catcher cup broke. They don't sell replacements. 3D printer to the rescue!
I didn't have any transparent filament so I have no pictures of a transparent replacement but if you use transparent filament Please post a photo of your build.
Transparent usually requires 100% fill to actually result in a transparent item but since I used PETG I got away with 20% fill. Although PLA should work fine, PETG is much more resilient therefore using it makes it more likely to withstand the kind of fall my OEM cup took.
I typically print stuff like this in draft mode (0.3mm/layer) but I thought that would collect grounds in the crevasses so I printed at 0.15. The finer grounds still collect just a little but it stays relatively clean overall.
UPDATE: I noticed the original .stl had a slight flaw in some of the build angles (None of the cup's sides are square to the base). The replacement (uploaded 2021.05.30) corrects the angles.
I didn't have any transparent filament so I have no pictures of a transparent replacement but if you use transparent filament Please post a photo of your build.
Transparent usually requires 100% fill to actually result in a transparent item but since I used PETG I got away with 20% fill. Although PLA should work fine, PETG is much more resilient therefore using it makes it more likely to withstand the kind of fall my OEM cup took.
I typically print stuff like this in draft mode (0.3mm/layer) but I thought that would collect grounds in the crevasses so I printed at 0.15. The finer grounds still collect just a little but it stays relatively clean overall.
UPDATE: I noticed the original .stl had a slight flaw in some of the build angles (None of the cup's sides are square to the base). The replacement (uploaded 2021.05.30) corrects the angles.
Similar models
grabcad
free
![Playmobil System X airport walkway side](/t/5617804.jpg)
Playmobil System X airport walkway side
...ue yet, but my kids don't seem to mind so for now the dirty transparent side stays in their custom built playmobil airport...
thingiverse
free
![small plant pot](/t/4906552.jpg)
small plant pot
...dvise you to do the same or to fill the bottom with something like sand
i have 3d printed this object solid with petg filament.
thingiverse
free
![Tron Lamp by masteruan](/t/8928390.jpg)
Tron Lamp by masteruan
...can use max fill 30%. after the print i have used a white led strip on the border of the lamp. i like the result.
please comment.
thingiverse
free
![FLSUN QQ-S Pro Filament Roller Guide by DRC_Designs_Things](/t/8235853.jpg)
FLSUN QQ-S Pro Filament Roller Guide by DRC_Designs_Things
...ion right off my printer. printed at 240/90 with overture transparent blue petg @ 35 mm/s.
designed in solidworks, sliced in cura
thingiverse
free
![Tigger Sun Catcher](/t/4683173.jpg)
Tigger Sun Catcher
...transparent pla of the right colour. this mostly worked, but sometimes i had to sand the pet pieces down a little to make it fit.
thingiverse
free
![Rabbit - Sun Catcher](/t/4681311.jpg)
Rabbit - Sun Catcher
...transparent pla of the right colour. this mostly worked, but sometimes i had to sand the pet pieces down a little to make it fit.
thingiverse
free
![Eeyore Sun Catcher](/t/4681319.jpg)
Eeyore Sun Catcher
...transparent pla of the right colour. this mostly worked, but sometimes i had to sand the pet pieces down a little to make it fit.
thingiverse
free
![Piglet - Sun Catcher](/t/4681369.jpg)
Piglet - Sun Catcher
...transparent pla of the right colour. this mostly worked, but sometimes i had to sand the pet pieces down a little to make it fit.
thingiverse
free
![Pooh - Sun Catcher](/t/4681476.jpg)
Pooh - Sun Catcher
...transparent pla of the right colour. this mostly worked, but sometimes i had to sand the pet pieces down a little to make it fit.
thingiverse
free
![Wire Holder by coopajoe6](/t/8358974.jpg)
Wire Holder by coopajoe6
...u're printing isn't too brittle. personally, i used pla, but i'm sure something like abs or petg would work the same.
Taclguru
thingiverse
free
![3D Filament clip 1.75 by TaclGuru](/t/9683592.jpg)
3D Filament clip 1.75 by TaclGuru
...lament in but it's because the filament needs to bend just a bit rather than because the hole's precise size is critical.
thingiverse
free
![Kindle Fire HD10 Speaker horn by TaclGuru](/t/8096882.jpg)
Kindle Fire HD10 Speaker horn by TaclGuru
...quot; total diameter, 2.5" front to back. probably could be much smaller but didn't want to print another set to check.
thingiverse
free
![Venturi based vacuum generator by TaclGuru](/t/8110027.jpg)
Venturi based vacuum generator by TaclGuru
...i have) they will both be fine.
when i printed it standing up, no internal supports were needed, only some external ones. ymmv.
thingiverse
free
![Dyson Accessory Wall Mount by TaclGuru](/t/8362644.jpg)
Dyson Accessory Wall Mount by TaclGuru
...so the spring action would be a bit stronger. both parts have now gone thru a netfab repair cycle so slicing should be smoother.
thingiverse
free
![Leather Stitch Spacing Wheels by TaclGuru](/t/8116418.jpg)
Leather Stitch Spacing Wheels by TaclGuru
...ou can create a wheel with 5.67 stitches per inch and mark those stitches perfectly.
one of the .stl files prints all 20 at once.
thingiverse
free
![Grizzly T26417 spindle sander adapters & plates by TaclGuru](/t/9226674.jpg)
Grizzly T26417 spindle sander adapters & plates by TaclGuru
...have a slot to provide flex to the circumference, allowing the sleeve to fit. when released it expands to tighten it's grip.
Capresso
thingiverse
free
![Capresso On/Off switch by dhopson](/t/8316234.jpg)
Capresso On/Off switch by dhopson
...e
this is a simple modification i did to the capresso grinder to replace the timer dial with a standard 12mm spst toggle switch.
thingiverse
free
![Capresso Infinity Coffee Grinder Dial by freerobby](/t/8535601.jpg)
Capresso Infinity Coffee Grinder Dial by freerobby
...capresso infinity coffee grinder dial by freerobby
thingiverse
replacement plastic dial for the capresso infinity grinder.
thingiverse
free
![Capresso Portafilter Funnel Tamper Helper by cwebster2](/t/5025035.jpg)
Capresso Portafilter Funnel Tamper Helper by cwebster2
...up your portafilter with ground coffee without making a mess. this fits the portafilters that come with capresso ec pro machine.
thingiverse
free
![Capresso Grinder Tray - Dust Catcher by markwal](/t/8675118.jpg)
Capresso Grinder Tray - Dust Catcher by markwal
...ds and dust out of the bottom of it. i made this plate and sit the front two feet on it. the ground basket just clears the lip.
thingiverse
free
![Capresso Burr Grinder knob by gordonstrodel](/t/8057634.jpg)
Capresso Burr Grinder knob by gordonstrodel
...le then adjust the diameter with the original file as needed. do not use scaling in the slicer as that will scale the whole part.
thingiverse
free
![Capresso Burr Grinder knob by gordonstrodel](/t/8057964.jpg)
Capresso Burr Grinder knob by gordonstrodel
...inal in onshape: https://cad.onshape.com/documents/08ff9546e08b0bb9d645b6c8/w/b094388c35d2da255d069fdb/e/deec95ffe3428086742ea165
thingiverse
free
![Capresso coffee maker replacement tray by LostBullet](/t/8739203.jpg)
Capresso coffee maker replacement tray by LostBullet
...y machine the space for the tray seems not to be squared so i had to make it smaller to fit and then the cover did not fit right.
thingiverse
free
![Capresso Coffee Grinder Knob by noisevault](/t/8189892.jpg)
Capresso Coffee Grinder Knob by noisevault
... this, and i suggest printing rightside up, as the supports can be removed easily, and the outward facing side has a good finish.
thingiverse
free
![Capresso Infinity Coffee Grinder Knob by painteddigital](/t/8786933.jpg)
Capresso Infinity Coffee Grinder Knob by painteddigital
...can to form a replacement metal bar that fits to the internal gear. you can reuse your original if you don't lose it like me.
thingiverse
free
![Capresso Infinity Doser Tray Mod by rtablada](/t/8677140.jpg)
Capresso Infinity Doser Tray Mod by rtablada
...have a temporary switch to auto time and fill the portafilter (avoiding the awkward and inconsistent timer knob on the infinity).
Catcher
3d_export
$15
![baseball glove catcher catchers mitt](/t/11419152.jpg)
baseball glove catcher catchers mitt
...baseball glove catcher catchers mitt
3dexport
baseball glove catcher catcher's mitt
3d_export
$5
![dream catcher](/t/11497604.jpg)
dream catcher
...dream catcher
3dexport
low poly dream catcher
turbosquid
$65
![Toy Catcher](/t/13500245.jpg)
Toy Catcher
...y free 3d model toy catcher for download as c4d, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1707625)
3d_export
$10
![Medieval catcher 3D Model](/t/137312.jpg)
Medieval catcher 3D Model
...de catcher medieval middle ages wood military fence palissade war enemy castle
medieval catcher 3d model redbird3d 92006 3dexport
turbosquid
$31
![Rainbow Catcher Flower.lwo](/t/13290507.jpg)
Rainbow Catcher Flower.lwo
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
cg_studio
$59
![White Baseball Catcher 9054 tris3d model](/t/630096.jpg)
White Baseball Catcher 9054 tris3d model
...odel
cgstudio
.fbx - white baseball catcher 9054 tris 3d model, royalty free license available, instant download after purchase.
3d_export
$59
![HiPoly Cricket Player Catcher 3D Model](/t/46852.jpg)
HiPoly Cricket Player Catcher 3D Model
... glove gloves bat ball protection seams india british australia
hipoly cricket player catcher 3d model codethislab 71543 3dexport
3d_export
$59
![White Baseball Player Hipoly CATCHER 3D Model](/t/118247.jpg)
White Baseball Player Hipoly CATCHER 3D Model
...ntertainment hat helmet sport character man glove gloves
white baseball player hipoly catcher 3d model codethislab 79469 3dexport
3d_export
$59
![White Baseball Catcher 9054 tris 3D Model](/t/38285.jpg)
White Baseball Catcher 9054 tris 3D Model
...aseball bat ball entertainment hat sport character man glove
white baseball catcher 9054 tris 3d model codethislab 95120 3dexport
3d_export
$8
![Snack Catcher 01](/t/11385928.jpg)
Snack Catcher 01
...& .obj. please rate, when you buy. thanks! :) also, please check out my other useful portfolio items that you may be missing!
Grounds
3d_export
$13
![ground](/t/11402828.jpg)
ground
...ground
3dexport
modeling of ground... - maya - v-ray - car - animation
turbosquid
$3
![Ground](/t/13246435.jpg)
Ground
...
turbosquid
royalty free 3d model ground for download as max on turbosquid: 3d models for games, architecture, videos. (1695083)
turbosquid
$3
![Ground](/t/13391618.jpg)
Ground
...oyalty free 3d model ground for download as max, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1473656)
3d_ocean
$2
![Ground Bark](/t/15701.jpg)
Ground Bark
...ground bark
3docean
bark ground seamless texture tileable tiled
tileable, ground bark 2048×2048px high quality 300 dpi
vizpark
$50
![Real Grounds](/t/4565559.jpg)
Real Grounds
...ew set of 15 3d scanned ground textures for architectural visualization or games, fully tileable with resolution of 8k, 4k or 2k.
3d_export
$5
![ground 3D Model](/t/50424.jpg)
ground 3D Model
...ground 3d model
3dexport
ground textures
ground 3d model godzik 3022 3dexport
turbosquid
$6
![ground lamp](/t/13349850.jpg)
ground lamp
...osquid
royalty free 3d model ground lamp for download as c4d on turbosquid: 3d models for games, architecture, videos. (1492655)
turbosquid
$1
![Tree with ground](/t/13344514.jpg)
Tree with ground
...d
royalty free 3d model tree with ground for download as obj on turbosquid: 3d models for games, architecture, videos. (1152744)
3d_ocean
$6
![Ground. Gravel path.](/t/563060.jpg)
Ground. Gravel path.
...d textures. in this case, the texture of gravel paths. there are three maps in this archive: 1. 5000×5000 ground texture for c...
turbosquid
$99
![Sport Ground](/t/13383629.jpg)
Sport Ground
... free 3d model sport ground for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1397967)
Cup
3d_ocean
$2
![Cup](/t/862385.jpg)
Cup
...cup
3docean
bardak cup glass tea cup
low poly cup
archibase_planet
free
![Cup](/t/951850.jpg)
Cup
...planet
cup teacup kitchen ware glass cup coffee cup demitasse
cup n110413 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Cup](/t/953015.jpg)
Cup
...cup
archibase planet
cup teacup coffee-cup
cup - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Cup](/t/953017.jpg)
Cup
...cup
archibase planet
cup teacup coffee-cup
cup - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Cups](/t/951862.jpg)
Cups
...cups
archibase planet
cups cup teacup teacups
cups - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Cups](/t/951864.jpg)
Cups
...cups
archibase planet
cups cup kitchen ware
cups - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$7
![cup](/t/11937998.jpg)
cup
...cup
3dexport
this is a cup
3d_export
$7
![Cup](/t/11378577.jpg)
Cup
...cup
3dexport
cup
3d_export
$5
![cup](/t/11916221.jpg)
cup
...cup
3dexport
cup
3d_export
$5
![Cup](/t/11387415.jpg)
Cup
...cup
3dexport
cup