Canyon Spectral 29 enduro pack strap holder by Xotoy

Last crawled date: 4 years ago

Update 2: I added a peak in the front (v7 in the name) which can used to secure the bag (which need a loop). The bag seems to stay in place anyway, but with this extra safety measure the bag never going to slide out of the velcro strap even if it was not tightened properly. Also, hanging the bag on the peak, before securing it with the strap, makes the whole process of fastening it simpler.
Update: After sourcing a lower head profile screw (M5x12 mm Allen key) and thinner washer, I made a 2 mm thinner version (the one with v5 in its name). I also decided to remove the release liner of the double sided tape to take advantage of the adhesion it provides to minimise risk of accidental rotation during mounting on bike transportation racks.
I used double sided foam tape (w/o removing the release liner) as protective padding against the frame. An M5x20 mm hex bolt and 18x6.4 mm washer was used to secure the holder. The velcro strap came from a €2-3 pump holder from Decathlon.