Thingiverse
Cane Creek Forty Headset Installation Tool by scootersps
by Thingiverse
Last crawled date: 4 years, 7 months ago
Installation tool for installing Cane Creek 40 headset.
Make one Crown tool and 2 Bearing Cup tools.
You will need to also have the following items.
PVC 1.25 inner diameter
Threaded rods 5/8 Long enough for your head tube
2 5/8 Nuts
2 Large washers
Grease
Install crown race on fork. Make sure the area on the fork for the race has been prepped. Use plenty of grease. Use PVC to drive.
Install one bearing cup first. Then the other. Use plenty of grease.
Only use this procedure if you are comfortable working on bikes. This is the poor mans procedure for installing a headset.
Make one Crown tool and 2 Bearing Cup tools.
You will need to also have the following items.
PVC 1.25 inner diameter
Threaded rods 5/8 Long enough for your head tube
2 5/8 Nuts
2 Large washers
Grease
Install crown race on fork. Make sure the area on the fork for the race has been prepped. Use plenty of grease. Use PVC to drive.
Install one bearing cup first. Then the other. Use plenty of grease.
Only use this procedure if you are comfortable working on bikes. This is the poor mans procedure for installing a headset.