Camera to lens adapter by WildMania

Last crawled date: 3 years, 1 month ago

This Mobius to Zenit lens adapter is intended to serve as a 'long range' microscope, or tele-photo lens. By long range microscope, it is possible to get high magnification, while leaving enough space beneath for working. Note that it is printed with black PLA, but you need to spray some Black 'flat' (non reflecting) spray inside adapter to avoid stray lights.
M42 to Canon camera adapter is used as final thread for fixing, because 3D printed thread is not that good: https://goo.gl/Nwea9b
It is glued to adapter. Printing this thread in 3D is not recommended because it may faild. Mobius camera is light, while Zenit or Helios lens is heavy.
M12x0.5 mm thread on this adapter fit perfectly on Mobius camera with removed stock lens.
Note that there are three holes with M3 thread next to camera (for future adaptation and add-ons, such is FPV TX, battery or something else), and also three holes with M3 thread for possible mounting small monitor.
Bottom part has Imperial thread for direct mounting onto tripod. It is 3/8" (I think they call it so), so that you can fix this tele-photo thing on tripod - achieving good stability.
3D printing setting at my end is: layers height 0.15 mm, 40 mm/s, hotend 212C, bed 70C, support 'everywhere', brim or skirt NONE.