Thingiverse
Camera Mount Tripod Anet A8 by jimjamurprint
by Thingiverse
Last crawled date: 4 years, 1 month ago
This is a mount for a camera that can mount on a tripod. You will need a tripod screw. I have a C920 Logitech webcam that this works with.
Logitech C920:https://www.logitech.com/en-us/product/hd-pro-webcam-c920
Depending on the side that you want to mount this to, you may have to mirror the "MainClip.stl" so that the curve goes around your hot bed leveling screw. That is the only file that will require mirroring.
https://youtu.be/9YI3YsJLSzE
You will need:
2 - M3 x 14mm bolts -> you can go longer, but check your clearances on your y-axis (hot bed) before attempting to print.
You might need:
2 - M3 nuts
Supports are included with the "arm.stl", and the "MainClip.stl".
Logitech C920:https://www.logitech.com/en-us/product/hd-pro-webcam-c920
Depending on the side that you want to mount this to, you may have to mirror the "MainClip.stl" so that the curve goes around your hot bed leveling screw. That is the only file that will require mirroring.
https://youtu.be/9YI3YsJLSzE
You will need:
2 - M3 x 14mm bolts -> you can go longer, but check your clearances on your y-axis (hot bed) before attempting to print.
You might need:
2 - M3 nuts
Supports are included with the "arm.stl", and the "MainClip.stl".