Camera housing (fits e.g. innomaker wide angle camera) by Baerchi

Last crawled date: 4 years, 6 months ago

A housing for a wide angle lens camera from inno-maker (40 mm x 40 mm board). I found so many which only housed the small raspberry pi camera, for this camera I needed a bigger one, so I designed it. The fork to hold the body has a standard tripod mount included (1/4-20 UNC). However, it is only clamped to the body. I drilled a hole into the sides and connected a 1.6 mm screw to it.
I might provide the FreeCAD files later for you to modify.