Thingiverse
Caliper Data Connector by CactiFantastico
by Thingiverse
Last crawled date: 2 years, 10 months ago
My attempt to create a connector for the data port on my Digital Caliper / Dial Indicator.
All the holes on the model printed slightly under sized so I had to drill them all out after printing.
The Pin version uses 4 pins removed from a pin-strip (extra long, like Part:102838 from Pi Hut). The holes in the part should be slightly under-sized so the pins can be (carefully) forced through. Solder wires on to the pins before inserting them so the holes don't expand.
The wire version uses 4 cores from an ethernet cable (solid core). Thread the wire through from the back end of the connector using the large holes, then bend the wire back and through the holes at the top. Use a pair of pliers to pull the end tight.
The pin version is a little too delicate for me (with the wire I used) as the wires are easy to bend at the solder joint and will probably fail quicker than the other version. Adding heat shrink would probably help to relieve this but there isn't a lot of space between the pins.
The fusion models use user parameters for most of the geometry so holes and other sizes can be easily changed.
All the holes on the model printed slightly under sized so I had to drill them all out after printing.
The Pin version uses 4 pins removed from a pin-strip (extra long, like Part:102838 from Pi Hut). The holes in the part should be slightly under-sized so the pins can be (carefully) forced through. Solder wires on to the pins before inserting them so the holes don't expand.
The wire version uses 4 cores from an ethernet cable (solid core). Thread the wire through from the back end of the connector using the large holes, then bend the wire back and through the holes at the top. Use a pair of pliers to pull the end tight.
The pin version is a little too delicate for me (with the wire I used) as the wires are easy to bend at the solder joint and will probably fail quicker than the other version. Adding heat shrink would probably help to relieve this but there isn't a lot of space between the pins.
The fusion models use user parameters for most of the geometry so holes and other sizes can be easily changed.
Similar models
thingiverse
free
Caliper Data Connector by JMadison
...housing.
set aside and wait for the epoxy to cure.
once cured, trim the ends of the connector wires flush with the connector tip.
thingiverse
free
Digital Cailper Plug by noteasy2
...software:
it can be download from other designer as shown in the link below.https://github.com/makingstuffchannel/digitalcalipers
thingiverse
free
AA battery holder by Gawesome13
...#39;s pliers. i made my own connectors by bending the ends of the paperclips into a tiny loop the size of the wire connector. yay
thingiverse
free
Z Probe Magnetic Connector for Workbee by jrcul84
...of the design, i removed the alignment pins and holes on the subsequent revision as they found not to be necessary after testing.
thingiverse
free
Simple 2032 Battery Holder by Gobotix
...paperclip in place
slide battery in from thinner side
solder wires to paperclip ends
you're done (had to include a 10th step)
thingiverse
free
Tweaked Digital Caliper Data Port Connector by dakahler
...ire slightly as it's inserted. makes it a little bit easier to put everything together. every bit helps with parts this tiny!
thingiverse
free
2x3p programming connector for OpenSprinkler 3.2 by stanoba
...n header (as shown on image)
solder wires
crimp dupont pins on other end
put pin header to casing and fix with hot-glue gun
thingiverse
free
PIR HC-SR501 Housing With Extension by platinumfusiontechnology
...e pins and connectors, so instead of soldering 90 degree pins on, i added a box on the back where the wires may run down through.
thingiverse
free
3-pin fan connector (molex) by jpnurro
...applications.
(tip: print locking bar 'b' the right side visible surface downwards to get better layer direction strengt)
grabcad
free
SP16 waterproof connector
...ount.
also, looks like datasheets for these don't exist, hence everything was modeled with the help of ruler and calipers :)
Caliper
3d_export
$15
Wheel Detroit Cobra R rims and tire 3D Model
...3dexport rims tyre tire wheels sport performance disk brake caliper brembo yokohama detroit cobra wheel detroit cobra r rims...
3d_ocean
$8
High detailed 3D model of car wheel
...wheel 3docean accurate auto automobile automotive black brake brakes caliper car chrome custom detailed hi-poly hipoly material part quality...
3d_ocean
$25
Super Sport Car Wheel Set with Brembo Breaks
...car wheels with brembo double disc breaks and red caliper. front wheels and larger back wheels. ready to use...
3d_ocean
$8
High detailed 3D model of car wheel 77
...77 3docean accurate auto automobile automotive black brake brakes caliper car chrome custom detailed hi-poly hipoly material part quality...
3d_ocean
$18
Alfa Romeo 8C Competizione RIM in Maya
...rim in maya 3docean alfa alfa romeo brake brake caliper car car rim disc brake high poly materials maya...
3d_ocean
$12
vernier caliper
...9. scene contains 4583 vertex and 4319 faces, textures and materials. the rendering and materials, are set with vray adv 2.10.01.
3d_ocean
$8
High detailed 3D model of car wheel 03
...03 3docean accurate auto automobile automotive black brake brakes caliper car chrome custom detailed hi-poly hipoly material part quality...
3d_ocean
$19
Braid 4 RC wheel + tyre
...each wheel (tire + rim + brake disc + caliper has 30.700 polygons (not smoothed). i didn’t applied (collapsed)...
3d_ocean
$15
Baggy
...baggy 3docean 3d automobile blackfriday caliper car citroen detailed france french jeep mat materials people...
3d_ocean
$5
Generic rim
...generic rim 3docean acura alloy auto brake caliper car cars chrome disk fast honda mercedes racing rim...
Data
3d_export
$55
Internet bar 002 3D Model
...bar 002 3d model 3dexport comms room communication server data rack computer corporate intranet office internet network servers nodes...
3ddd
$1
Люстра Lugo 142.6 R50 brown
...3ddd lucia tucci classic overhead chandelier lugo 142.6 r50 brownhttp://luciatucci.ru/dataitems/1426brown.php ...
3ddd
$1
Dering Hall Torino Chandelier
...is based on the original manufacturer dimensions and technical data materials and groups are named the same, as the...
3ddd
$1
Window for roofs
...hinges are not modeled precisely due to insufficient manufacturer data some materials are set as layered blend materials- they...
3ddd
$1
Currey & Company Balthazar
...is based on the original manufacturer dimensions and technical data materials and groups are named the same, as the...
3ddd
$1
Currey & Company Orion
...is based on the original manufacturer dimensions and technical data materials and groups are named the same, as the...
3d_ocean
$5
TK1-003 Fast March Walk
...toon kid 1 – fast march walk tk1-003 animation data for very small characters with very short arms-legs, and...
3d_ocean
$8
Folding Paper Plane animation
...package conteins 1 model: folding_paper_plane /15 040 polygons/ animation data is in .max...
3d_ocean
$5
Grids Texture
...grids texture 3docean background box data futuristic graphic grid infographic modern sci-fi square technology a...
3d_ocean
$8
Alien Base Model
...file formats: .lxo (modo) .obj .fbx .max contains uv data and dummy...
Connector
3d_ocean
$3
Schuko Socket
...schuko socket 3docean electricity energy outlet plug connector power power point safety socket schuko socket wall socket...
archive3d
free
Spider system 3D Model
...spider system 3d model archive3d spider system spider glass connector spider-system spider glass system spider system to fix glass...
3d_ocean
$19
Element3D - Apple Macbook Pro Retina
...added speaker grid and some more detailed textures for connector and text. everybody who purchased, please re-download it ....
3d_ocean
$5
Electric Plug
...electric plug 3docean 220v 230v appliance connector cord electric electrical electricity electronic energy european jack outlet...
3d_ocean
$12
B&O BeoPlay A8 3D model
...sound systems connections for: ipod / iphone / ipad connector mini-usb socket, line-in via phone (aux). - high detailed...
3d_ocean
$12
iPhone 5
...dimension and blue prints released online by apple, new connector style, cameras position, buttons, audio jack, audio grid...
3d_ocean
$49
Realistic Pro DJ Mixer Pioneer DJM900nexus Limited
...cinema 4d. obj, fbx. .mb .3 ds high resolution, connector, potentiometers, cables, brands, serial numbers, vumeters, lights, digital effects...
3d_export
$5
USB termination 3D Model
...usb termination 3d model 3dexport usb connector pc cable obj fbx 3ds termination usb termination 3d...
3d_export
$15
Terminal Block 3D Model
...terminal block 3d model 3dexport electrical connector terminal block strip modular connect screw clamp barrier wiring...
3d_export
$5
Electric plug 3D Model
...electric plug 3d model 3dexport plug connector power electric electricity cord detailed realistic accurate 3d max...