Calibration Matrix - Tubes by BDan

Last crawled date: 4 years, 1 month ago

This model is to be 3D printed on a B9Creator to help determine resin pigmentation and light exposure time, as well as to help model tubes with tiny holes so that they come out as expected. It's made to be printed on the 50µm pixel Setup but you can scale it 200% for the 100µm pixel setup. Basically, there are 3mmDiameter tubes from 1mm to 10mm high. These tubes have holes sizes 1mmD; 0,75mmD; 0,5mmD and 0,25mmD. 2 rows per diameter (1 row for the 0,25mmD) one row full tubes from top to bottom and one row with breathe holes at the bottom to allow resin to go down the tubes (works best).
Link to the Skp file for customization:https://3dwarehouse.sketchup.com/model.html?id=u3ff97938-8fde-44ce-8bb7-80271b04e753
and to the youtube video:http://www.youtube.com/watch?v=fFr8lBqhTPE