Thingiverse
Calibration Beam 170mm x 5mm x 5mm by Ohmarinus
by Thingiverse
Last crawled date: 2 years, 12 months ago
Hi all, this is a set of 2 beams that you can print on your printer to see if it prints the exact length you input into the printer.
The square one to do both lengths at once, 100x100mm X and Y, this is useful if you have a measuring device that cannot measure lengths like 170mm.
I have made the long one because most printers have a print range ranging from 175~200mm's of size on the printbed, and most calibration parts that I have found are either for making circles or are just a set length like 50mm or a 100mm's long. I wanted to get a more precise measurement, and you only get more precise when you add more length because when your printer isn't calibrated a 100% it wil be more visible with a longer piece.
Anyway, this was for personal use, but I am willing to share.
I hope it is of any use to someone.
The square one to do both lengths at once, 100x100mm X and Y, this is useful if you have a measuring device that cannot measure lengths like 170mm.
I have made the long one because most printers have a print range ranging from 175~200mm's of size on the printbed, and most calibration parts that I have found are either for making circles or are just a set length like 50mm or a 100mm's long. I wanted to get a more precise measurement, and you only get more precise when you add more length because when your printer isn't calibrated a 100% it wil be more visible with a longer piece.
Anyway, this was for personal use, but I am willing to share.
I hope it is of any use to someone.
Similar models
thingiverse
free
Calibration "Cube" by NotAnotherLogin
...ut if you're over-extruding a bit, they'll be almost closed. the holes are 80mm apart.
comments and critique are welcome.
thingiverse
free
40mm Bridge Calibration Print by matthewlaberge
...ill help you get the settings right for really long bridges.
the bridge distance is 40mm, the overal length of the print is 60mm.
thingiverse
free
Support / Bridging and Calibration Test by steverip
...n the settings i used for one of the prints but i have used this on all my printers with various settings to get them calibrated.
thingiverse
free
Simple X-Y Calibration by scottbg1
...kes about 10 seconds to print.
i adjusted the offset settings in arduino and uploaded to the printer to check to see the results.
thingiverse
free
MPMD Dimensional Accuracy Hex Calibration
...n m4mpmd.
each of the outside measurements = 80mm (8cm) and the inside = 50mm (5cm) as indicated by the 5 and the 8 on the print.
thingiverse
free
XYZ 15_30_45 Calibration Stairs by Kapplion
...can measure if a offset is on more than one measurement off. this way you get a better average of measurments for the adjustment.
thingiverse
free
Calibration-30mm by dgwilson
...ject to get the finish you desire out of your printer. you can experiment with different slicers and different printer precision.
thingiverse
free
3D-printerbed calibration by askmurphy
... also look at the flat surfaces: they must be looking good and flat too.
adapt your bed if needed and print it again if you like.
thingiverse
free
20mm calibration cube with hole 10mm by annu333
...rint setup - custom - shell - horizontal expansion
calculation:
(measured value - 10mm)/2=setting in cura
exam. (9.28-10)/2=-0,36
thingiverse
free
Multi Sized Calibration by MayhemOfHell
...inted length
x-axis = (20*86.95)/22
so the above x-axis now equals 79.04, simply adjust this in your eeprom or firmware directly.
Ohmarinus
thingiverse
free
Supersimple Air 2 Spool Holder by Ohmarinus
...ount my spool on the back of my machine, couldn't find anyone else that tried yet, so i designed this one in a quick session.
thingiverse
free
Very simple Sanguino 40mm fan holder by Ohmarinus
...he quickest because it has to drive 2 motors instead of one on my reprap air 2.
i hope this is of any use for others.
marinus
thingiverse
free
J-head cooling shield for 30mm fan by Ohmarinus
...ave to make different approaches to how the air-flow will work the best and make everything actually fit well together.
marinus
thingiverse
free
Hex washer insert for Prusa Improved X-end by Ohmarinus
...wever, if you have a functional printer, you can print out this washer and use it without even having to buy a trim nylon washer.
thingiverse
free
30mm Fan mount on the exsting platform for Rostock Mini/J-Head by CNC-Loop
...quality of the parts. i edited stl by mr. ohmarinus ...
170Mm
3ddd
$1
Illuminazione Darte Table lamp 03
...darte table lamp 03 white oak table lamp / 420mm*170mm ...
3ddd
$1
Aton 65017
...giorgetti _http://www.giorgetti.eu _ модель: aton 65017 размеры: w-1000mm, d-1000mm, h-170mm ...
3ddd
$1
Anglepoise Type 75 Mini
...shade height 150mm - reach 500mm - base diameter 170mm - cable length...
3ddd
$1
LEE BROOM CHAMBER LARGE AND SMALL
...large and small 3ddd lee broom large dimensions: dia. 170mm h 260mm materials: carrara marble, lead crystal small dimensions:...
3d_export
$9
staircase with pantry
...staircase on the kosoura. step - 270mm riser - 170mm width - 3650mm depth - 1780mm height - 2950mm<br>3ds...
3ddd
free
Indian vase
...большой вазы - 600mm, ширина - 100mm, высота - 170mm в сцене нет цветка лотоса. лотос был использован для...
thingiverse
free
Skimmer with 170mm diameter by dklueh
...skimmer with 170mm diameter by dklueh
thingiverse
170mm skimmer basket for pools. an handle is included, but optional
thingiverse
free
170mm Stake by derikwhittaker
...ake without the eye holes. simple splice/paste and simple remix. this has been sized to 170mm i length as that is what i needed
thingiverse
free
Mechanicus base 170mm
...mechanicus base 170mm
thingiverse
this base does not match my model but it may be useful to someone
thingiverse
free
Pool Skimmer 170mm Diameter, by dklueh
...ersion 85mm:
upper dia: 170mm (ring)
length: 87mm
bottom dia: 120mm
you can use pla, even when it's almost in the water.
Calibration
turbosquid
$15
DEFIBRILLATOR CALIBRATORS
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
Calibration Test Benches
...libration test benches for download as 3ds, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1355804)
turbosquid
$79
Tag Heuer Monaco Calibre 11
...free 3d model tag heuer monaco calibre 11 for download as max on turbosquid: 3d models for games, architecture, videos. (1634427)
turbosquid
$50
Smith & Wesson 50 Calibre Magnum
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
Laboratory Calibration Weight Set 1 3D Model
... 3d model
3dexport
laboratory lab science equipment weight set
laboratory calibration weight set 1 3d model bessoo 88084 3dexport
3d_export
$15
Laboratory Scale and Calibration Weight Set 3D Model
...port
laboratory lab science equipment weight set scale
laboratory scale and calibration weight set 3d model bessoo 88203 3dexport
3d_export
$5
3D printer filament calibration tool 3D Model
...ernier
3d printer filament calibration tool 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl locoman 107942 3dexport
3d_export
$59
tag heuer link calibre 16 watch
...built to real-world scale. units used: centimeters. model is 18 centimeters tall.<br>scene objects are organized by groups.
3d_export
free
laser height reference calibration tool opt lasers
...ind out more about the engraving and cutting laser heads, this item was designed to work with, take a look at the following page:
3d_export
$99
Patek Philippe White Gold Calibre 89
...br>please note: this 3d model like all my other models cannot be used as nft, as is or modified<br>thank you for reading
Beam
archibase_planet
free
Beam
...beam
archibase planet
beam camber-beam hammer-beam
balance beam 2 - 3d model for interior 3d visualization.
design_connected
$16
Beam
...beam
designconnected
van rossum beam computer generated 3d model. designed by rossum, van.
design_connected
$11
Beam
...beam
designconnected
mdf italia beam computer generated 3d model. designed by arrivillaga, luis alberto.
turbosquid
$25
beam
...am
turbosquid
royalty free 3d model beam for download as stl on turbosquid: 3d models for games, architecture, videos. (1674400)
turbosquid
free
beam
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
ZERO, BEAM
...zero, beam
3ddd
zero
поворотная люстра zero , beam
archive3d
free
Beam 3D Model
...archive3d
beam camber-beam hammer-beam
balance beam 2 - 3d model for interior 3d visualization.
3ddd
free
Studio Beam
... navy
светильники studio beam
модели: mariner, ocean mariner, navy.
могут быть в разных цветах
3ddd
$1
Studio Beam
...grupius
производитель studio beam
модели: edison’s rocket pendant, edison’s rocket table lamp,romanov,elena pendant,grupius 1919.
design_connected
$11
I-Beam
...i-beam
designconnected
glas italia i-beam computer generated 3d model. designed by massaud, jean-marie.
5Mm
3d_export
$25
5mm Explosive Flechette 3D Model
...xplosive flechette 3d model
3dexport
assault rifle grenade launchers
5mm explosive flechette 3d model awnonbhowmik 74565 3dexport
turbosquid
$15
engagement simple ring with diamond (5mm)
...engagement simple ring with diamond (5mm) for download as 3dm on turbosquid: 3d models for games, architecture, videos. (1157278)
turbosquid
$1
Flexible shaft coupling 5mm x 8mm
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$7
Tiny bracelet clasp lock 20mm X 5mm
... your bracelet parts to the clasp, also there is the original file in the files so you can change it on your own simply. enjoy it
3d_export
$5
cross with text jesus
...the text jesus is in an contur offset with 5mm ...
3d_export
$5
ring
...ring 3dexport lovely ring, adopt for print, one stown 5mm material : white / yellow gold/ silver. stl,...
3d_export
$11
crescent ring
...ring size is 17mm.<br>ring rail size is 53.4<br>stone size 5mm ...
3d_export
$5
Hex Spacers M3 Male-Female
...male-female 3dexport hex spacers m3 male-female with length from 5mm to 60mm for printed circuit boards. step...
3ddd
$1
LOOP RACK
...вешалка the clothes rack’s elegant frame is made of 5mmthick steel. it creates simple shapes, that vary depending on...
3d_export
free
solar rechargeable single led flashing light
...ties onto a pole etc, i used a single 5mm red/blue alternating flasher that pushes snugly into the 5mm...