[CAD Concept] MMC-V1.R1 (Moon Movers Containers)

Last crawled date: 1 year, 4 months ago

NASA Challenge 2022 : Moon Movers

Description, Rules, and Problem :
==>> 1 Containers sould be able to load up to 75 CTBs :
In this design 1 Containers can load up to 25 CTBs, So it takes 3 containers [1].
==>> 2 Hold a pressure of at least 8.2 psi :
In this case the outer body design is made cylindrical [2], and there are 4 pressure tubes [3], and 4 additional tubes [4] (located on the front and rear of the outer body).
==>> 3 Temperature between 10 and 30 degrees Celsius :
In the inner structure (rotating suction cylinder) in the contents there are 5 heating elements that are able to maintain a temperature between 10 - 30 C [5][6].
==>> 2&3 Additional for Pressure and Temperature Problem :
To be able to support pressure and temperature to remain stable, the inner cylinder can always rotate relative to the main body [7], with a motor drive [8].
==>> 4 Data Logging and Transmission :
The lower left corner outside the body is all computer components and data transmission [9], in addition to the above there is 1 antenna that can rotate for adjustment [10].
==>> 5 Power and Backup Power :
For power, here it uses 7 main batteries [11] (located in the cylindrical part of the structure), and there is a solar cell ball as (on the top left outside of the body) as a backup power [12].
==>> 6 Packing and Unpacking :
To load and unload from lunar module there are two door loacted on the top right of the main body [13], and to load and unload on the moon there are doors on the front and rear [14].
==>> 7 Delivery and Handling :
For delivery and handling on the moon, we use a modular vehicle [15], and for delivery to the surface of the moon, we use the lunar module [16], like my first design concept [17].
==>> 8 Interfaces :
For this problem, it may have been mentioned in numbers 6 and 7 [18]
==>> 9 Support Equipment :
For the support equipment for the crew is located on the lower rigth corner outside the body [19].
==>> 10 Reusability :
Container concepts could potentially have other functionality for repurposing after they have delivered the cargo, have a pressure equalization valve and be able to monitor internal pressure and temperature data