Thingiverse
CactusHotel by XoGuSi
by Thingiverse
Last crawled date: 3 years ago
A modular solution for your plants. We are using it for our Cacti /Cactuses, but you can also use every kind of plant. The windows are very good for a good airflow to the roots and they are preventing overwatering or that something is rotting inside.
In summer they are standing separated at our balcony and in winter together in our living room. Everything is standing very narrow together and it is possible to print out some more houses.
You can choose between 20 covers, so you only need to change the cover if your plant needs a bigger pot.
Because I don't like supports I designed them in the way that it is possible to print them without supports. The covers I printed upside down.
Included in the package:
5 houses
6 covers for the smaller pots with diameters: 46mm, 51mm, 56mm, 61mm, 66mm and 71mm
14 covers for the bigger houses with diameters: 46mm, 51mm, 56mm, 61mm, 66mm, 71mm, 76mm, 81mm, 86mm, 91mm, 96mm, 97mm, 101mm and 102mm
In summer they are standing separated at our balcony and in winter together in our living room. Everything is standing very narrow together and it is possible to print out some more houses.
You can choose between 20 covers, so you only need to change the cover if your plant needs a bigger pot.
Because I don't like supports I designed them in the way that it is possible to print them without supports. The covers I printed upside down.
Included in the package:
5 houses
6 covers for the smaller pots with diameters: 46mm, 51mm, 56mm, 61mm, 66mm and 71mm
14 covers for the bigger houses with diameters: 46mm, 51mm, 56mm, 61mm, 66mm, 71mm, 76mm, 81mm, 86mm, 91mm, 96mm, 97mm, 101mm and 102mm
Similar models
thingiverse
free
Cactus Stand by Burrel87
...er to fit your pot diameter and scale up the height so the pot is raised up a bit and not resting on the surface you place it on.
thingiverse
free
Tripple Plant Pot by coolo
...gether (just yet), but i wanted one common pot to water them together. so i designed this - and possibly it's useful for you.
thingiverse
free
Mini modern plant pot by AceProjectDesign
...ojectdesign
thingiverse
a very simple but good looking mini modern plant pot. can be rescaled if need be to fit a bigger plants.
thingiverse
free
Modular trellis / lattice / plant support
...er tightly. plan out how you'll put it together first, i haven't had good luck taking it apart after fitting it together.
thingiverse
free
Induction Motor Capacitor Cover (46mm) by jas6191
...the specific motor in my case was a ge 5kc47ab899c. the cover is mounted on the motor by a couple of screws that are ~61mm apart.
cg_trader
$10
Sakura Pot | 3D
...e fdm printing. you need to generate some supports for the design.
good looking for them anywhere in the house, room, and office.
thingiverse
free
Plant support by Sasha
...n you stick the whole thing in the ground), and you can add as many support parts as you like as they stack on top of each other.
3dwarehouse
free
STAND POT BESI, POT STEEL,
...this is a model for a decorative plant, for its place of iron, can pot on it pot plant, very good for your garden home decoration
thingiverse
free
Seed plant pot by Itek
...eeds into.
press from the bottom to easily press out all dirt when the plant need to be replanted into a bigger pot.
good luck :)
thingiverse
free
Spongebob house plant pot by Simon83S
...a drain pipe at the back and a closed bottom.
i printed in 200% and 250% and needed supports on the first window and the chimney.
Xogusi
thingiverse
free
Canton CD 50 Holder by XoGuSi
...some month and it is stable.
we used m6 screws because printed pins are not working here. the holder was printed with 50% infill.
thingiverse
free
PentaPot by XoGuSi
...nfill. i used 15%. it depends on your taste which layer height you are using. i used a 0.5mm nozzle with a layer height of 0.3mm.
thingiverse
free
Rubber band adjustable level slider by XoGuSi
...r band is fixed between the sensor and the slider. the other end is fixed with a knot.
the holder works fine and accurate for me.
thingiverse
free
3 Wheel Carriage (2020) with fans and autoleveling by XoGuSi
...nectors.
5) maybe i will put the fans also at the level holder under the belt.
6) maybe i will change the blower to a nicer look.