Thingiverse
Caboose's Primitive Quadcopter by Caboose
by Thingiverse
Last crawled date: 4 years, 6 months ago
Intro
The goal of this project was to create a small, modular, printable quadcopter body. I aimed to keep this as simple as possible.
The quadcopter is made up of a core, and 4 arms. All arms are identical.
Parts List
Turnigy 2900KV Brushless Outrunner OR Turnigy Park480 Brushless Outrunner 1320kv
Turnigy Plush 6A ESCs or HobbyKing 6A ESC 0.5A UBEC
5030 Props
5030R Props
1000mAh 2S NanoTech LiPo (or similar)
KK2 Flight Controller
8 x 12mm or 15mm M3 Bolts
4 x 40mm M3 Bolts
10 x M3 Nuts
Read assembly instructions for more details.
Change List
v2: Spacing change, removal of extra weight. Landing strut available if you don't want to use M3 screws
v1: Initial release
The goal of this project was to create a small, modular, printable quadcopter body. I aimed to keep this as simple as possible.
The quadcopter is made up of a core, and 4 arms. All arms are identical.
Parts List
Turnigy 2900KV Brushless Outrunner OR Turnigy Park480 Brushless Outrunner 1320kv
Turnigy Plush 6A ESCs or HobbyKing 6A ESC 0.5A UBEC
5030 Props
5030R Props
1000mAh 2S NanoTech LiPo (or similar)
KK2 Flight Controller
8 x 12mm or 15mm M3 Bolts
4 x 40mm M3 Bolts
10 x M3 Nuts
Read assembly instructions for more details.
Change List
v2: Spacing change, removal of extra weight. Landing strut available if you don't want to use M3 screws
v1: Initial release