Cable Duct CTC by blackbird2016

Last crawled date: 3 years ago

If you made this thing and are happy with it I kindly ask to let me and others know...
I had some heat-cartridges here which I wanted to test some time but never did for
it always daunted me unwrapping all those cables without absolute need of.
So I made this cable-duct which still looks kind of professional (I think at least)
but could be easily opened and the cables removed.
There is need to drill new holes for it, I intentinally did not use the ones already there.
The upper one is directly behind the y-axis driveshaft, for the lower one you would need to
hit the nut again which is hidden in the bottom plate and between back-wall and z-axis motor.
I placed the holes that they are accessible from the front.
Use M3 counter-sunk ones, even for flat heads there is not enough space between wall
and moving platform. And still the holes are directly behind the z-shaft so it will be a bit fiddly, though.
Print as much clips as you see fit for your needs or scale it in the z-axis for complete enclosure...