Thingiverse
Cable Chain Mount by m3lvm
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is a rework of the cable chain mount on the Tronxy X5S, but could be used on any core X Y cube. When receiving the new X5S release the connector block has been removed and the cables are soldered together. When Tronxy did this they made the cables too short, and a complete rewire is required. This mount has a cable management box built in to correct this issue. There is space to install a solder tag strip inside, and as you see in the photo I also used a terminal block to be used for the hot end cables to make it easy switch out.
I have also added a boom arm to keep the Bowden tube away from the Y stepper on the Tronxy plus it helps with the tube sagging and fouling with the cable chain.
You will need
M2 Screws 4 x 5mm
M3 Screws 4 x 10mm I used computer case Blanking plate screws
M3 nut and bolt 40mm
cable strain relief.
I have also added a boom arm to keep the Bowden tube away from the Y stepper on the Tronxy plus it helps with the tube sagging and fouling with the cable chain.
You will need
M2 Screws 4 x 5mm
M3 Screws 4 x 10mm I used computer case Blanking plate screws
M3 nut and bolt 40mm
cable strain relief.
Similar models
thingiverse
free
Cable Chain Mounts for 10mm x 15mm Drag Chain
...mounts the chains.
4 - m3 x 8mm
2 - m3 x 12mm
1 - m3 x 10mm
2 - m5 x 15mm
updates:
01172020 - replaced chain mount for tool head.
thingiverse
free
Tronxy X5 X Motor Mount by Galvit
...tronxy x5 x motor mount by galvit
thingiverse
you will also need:
1x 12-20mm m3 countersunk screw
todo: integrate belt clips.
thingiverse
free
Tronxy X5 X Belt Tensioner by Galvit
...tronxy x5 x belt tensioner by galvit
thingiverse
you will also need:
1x m3 nuts
1x 20mm m3 countersunk screw
thingiverse
free
TronXY X5s E3D V6 extruder holder by JD_Printing
...nxy x5s. uses the existing mounting plate and e3d cooling fan.
back plate mounts with m3 screws. the front plate with m3 screws.
thingiverse
free
Tronxy X5S Z Cable Chain Upgrade (updated) by AngelKing86
...nice upgrade to stabilize the z axis.
you need 5 chain pices from the extruder chain and a few m3 screws to screw on the z mount.
thingiverse
free
TronXY X5 Clamp fix for Cable Chain by clariongrade
...o i hacked one of its mounts to a stepper motor clamp and this is the result.
cables now tidy and clear of the carriage movement.
thingiverse
free
Tronxy X5S LED Rail-System by T3ddyDangerous
...giverse
easy printable modular led rail-system for the tronxy x5s. used m3 screws for the rail and m4 with t-nuts for the mount.
thingiverse
free
Cable Chain Moint for Tronxy X1 by Loulexismus
...f the part holding the x-endstop.
i also modified a chainlink to link it to the hot end housing, it will need 2 m3 screws + nuts.
thingiverse
free
X5S multimeter mount by Dnewgent92
...by dnewgent92
thingiverse
allows you to mount a multimeter on the tronxy x5s 20x40 aluminum extrustion.
uses m3 bolts to mount
thingiverse
free
TronXY X5S Part Cooling fan mount by JD_Printing
...m/thing:2706922 but it has to be mirrored in printing.
a little filing is necessary to get it to slide on to the mounting plate.
M3Lvm
thingiverse
free
Stepper Spacer by m3lvm
...by m3lvm
thingiverse
just a simple spacer for stepper motors
i have also included the skp file so you can enlarge for your needs
thingiverse
free
x_Axis_motor_linear_Screw by m3lvm
...ouling the linear rails.
the hole depth for the linear rails is 39mm. and you will have to make allowance for this when upgrading
thingiverse
free
Bowden Mounting Cap V5 - V6 by m3lvm
... added to the project i am working on in thingiverse where you will be able to download a complete set of parts for the i3 steel.
thingiverse
free
Lead Screw Calibration Tool by m3lvm
...ossible ghosting on the print, but once happy with the print quality and you can guarantee perfect duplication i would print two.
thingiverse
free
Tronxy-E3D_Mount_Modular_Hurricane by m3lvm
... / y:0
5015 fan & abl alt (18mm thread). offset x:63mm / y:12mm
bltouch mount
30mm heatsink fan mount
40mm heatsink fan mount
thingiverse
free
Prusa 3 Steel Feet Large Plus Board Mount by m3lvm
...re the printer stays symmetrical. with out movement.
if the built in brackets are too thin let me know and i will ammend the file
thingiverse
free
TRONXY X5S Z AXIS SINGLE STEPPER CONVERSION by m3lvm
...east it's across both linear shafts.
i have added the skp files in case slight adjustments are needed for your printer setup.
thingiverse
free
Tronxy X5S Z-Axis Mount by m3lvm
...near rod. this should help with measuring the distance and lock everything as it should. i will upload images once installed.....
thingiverse
free
Orballo Steel X Axis by m3lvm
... the alignment of the bearing.
i will be modifying the cable chain mount to compensate for a new bearing mount on the lead screw.
Chain
archibase_planet
free
Chain
...chain
archibase planet
chain chain link chain loop
chain n020708 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
chain
...chain
3dexport
3d model chain
3d_export
$5
chain
...chain
3dexport
chain. obj,fbx,blend
archibase_planet
free
Chain
...se planet
chain circuit catena
chain - archicad parametrical gdl 3d model (*.gsm). regulation of the length, curvature and angle.
archibase_planet
free
Chain
...n
archibase planet
chain circuit catena
chain - archicad parametrical gdl 3d model(*.gsm). regulation of the length and angle xyz
3d_ocean
$5
Chain
...chain
3docean
3d models chain design elements
3d models, design elements
3d_ocean
$5
Chain
...chain
3docean
3d models chain design elements
3d models, design elements
turbosquid
$10
Chain
...hain
turbosquid
royalty free 3d model chain for download as on turbosquid: 3d models for games, architecture, videos. (1329200)
turbosquid
$9
chain
...hain
turbosquid
royalty free 3d model chain for download as on turbosquid: 3d models for games, architecture, videos. (1549461)
turbosquid
$2
Chain
...hain
turbosquid
royalty free 3d model chain for download as on turbosquid: 3d models for games, architecture, videos. (1148668)
Cable
3d_export
free
Cables
...cables
3dexport
cables for your purposes
3d_export
free
cable belt for cable organization
...ze your cables in 3d printers. it will bend only to one direction. the area to put the cables per piece is aprox. 1,6cmx2,6cmx1cm
3d_ocean
$16
Ethernet Cable
...ethernet cable
3docean
cable computer electronics ethernet internet network connected
ethernet cable 3d model
3d_export
$65
cable
...cable
3dexport
simple rendering of the scene file
turbosquid
$14
Cable
...l cable for download as ma, max, fbx, 3ds, gltf, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1631358)
3ddd
$1
Cable Cover
...cable cover
3ddd
кабель
vertebra passacavo - cable cover
max + vray 2.20.03
3d_export
$15
Cable reel
...without cable. textures 4k 4096x4096 targa, png, jpeg.<br>number of polygons without cable: 2896<br>with cable: 35328
3d_export
$7
short cable
...short cable
3dexport
rubber cord. very detailed. cable thickness: 2.55 mm total length: 55mm
3d_export
$5
USB CABLE
...usb cable
3dexport
turbosquid
$30
Cable Reels
...osquid
royalty free 3d model cable reels for download as fbx on turbosquid: 3d models for games, architecture, videos. (1439507)
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)