Thingiverse
![Cabinet Handle Drill Templates](/previews/4656273.jpg)
Cabinet Handle Drill Templates
by Thingiverse
Last crawled date: 4 years, 4 months ago
These cabinet door and drawer handle drilling templates are for handles with 2 screws and a 3" screw to screw spacing. You should make a left and right hand version of the door template. Mirror the STL file in your slicer (Gcode generator) to accomplish this. The screw holes for the door template are 1.75" from the narrow side and 1.5" from the long side. The Shaker style cabinets that I installed have a 3" wide border frame. This will put the handles in the center of that frame, which I find looks best. You may need to adjust them for your style cabinets.
For the drawer template, it should just snap into place on the top drawers. You'll just need to mark the left to right center on a piece of tape. On the taller, lower drawers, you will need to put a piece of tape on the front of the drawer to mark the center of the drawer height. There is a hole at the center of the template so you can find your mark. See the blue tape picture.
Usage Tip: Carefully drill your first screw hole, then help keep the template in place by putting a screw through the template and into the hole. See the template picture with one screw.
Buying Handles Tip: Spend a little more and get the solid handles instead of the hollow ones. The hollow ones tap the leg screws into the thin handle metal so they mostly are NOT perpendicular to the handle. Because of this, the screw holes distances vary greatly so you will not be able to use a drill template. The solid stainless steel handles I used were bought off Amazon.com.
For the drawer template, it should just snap into place on the top drawers. You'll just need to mark the left to right center on a piece of tape. On the taller, lower drawers, you will need to put a piece of tape on the front of the drawer to mark the center of the drawer height. There is a hole at the center of the template so you can find your mark. See the blue tape picture.
Usage Tip: Carefully drill your first screw hole, then help keep the template in place by putting a screw through the template and into the hole. See the template picture with one screw.
Buying Handles Tip: Spend a little more and get the solid handles instead of the hollow ones. The hollow ones tap the leg screws into the thin handle metal so they mostly are NOT perpendicular to the handle. Because of this, the screw holes distances vary greatly so you will not be able to use a drill template. The solid stainless steel handles I used were bought off Amazon.com.
Similar models
thingiverse
free
![Cabinet Handle Template 95.5mm Spacing by ragingrivers](/t/8810703.jpg)
Cabinet Handle Template 95.5mm Spacing by ragingrivers
...cision and i am not liable for any upset significant others or anything that occurs using these templates. use at your own risk.
thingiverse
free
![Drawer hardware drilling template by blazer5154](/t/8738913.jpg)
Drawer hardware drilling template by blazer5154
...rdware drilling template for 3-3/4" drawer pull. align center mark with horizontal center and drill holes for drawer handle.
thingiverse
free
![a template for marking and installing handles on drawers and cabinet doors by ACKET](/t/8312991.jpg)
a template for marking and installing handles on drawers and cabinet doors by ACKET
... installing handles on drawers and cabinet doors
for mounting:
1 knobs
2 handles with holes on 96mm
3 handles with holes on 128mm
thingiverse
free
![Cabinet Pull and Knob Templates by DraftingJake](/t/8547640.jpg)
Cabinet Pull and Knob Templates by DraftingJake
...n notch to center of drawer) holes start 3" down and 3" apart. centered on notch.
*not all pulls are 3" on center.
thingiverse
free
![Self Centering drill template by davetpet](/t/8019107.jpg)
Self Centering drill template by davetpet
...rk it on the tape.
place the rig on the drawer, pull the top and bottom to fit, and align the notch with your center mark, drill.
thingiverse
free
![Drawer pull template by FreiGuy](/t/8522167.jpg)
Drawer pull template by FreiGuy
...per-highlights-bauhaus-bar-cabinet-pull/50019888
comment if you want another dimension, or just tweak the .stl file in tinkercad.
thingiverse
free
![European Cabinet Hinge Drill Template by jolang](/t/8602391.jpg)
European Cabinet Hinge Drill Template by jolang
...ultaneously (idea got from xmass's "cabinet door hinge template (jig)", https://www.thingiverse.com/thing:2641809).
thingiverse
free
![Drawer Pull Drilling Jig (file included to modify centers) by SpeedMaker](/t/8017882.jpg)
Drawer Pull Drilling Jig (file included to modify centers) by SpeedMaker
...modify centers) by speedmaker thingiverse drawer pull drilling jig, similar to the rockler jig it, which is designed to...
thingiverse
free
![Ubiquity Access Point drill template by HJKOCH](/t/8254171.jpg)
Ubiquity Access Point drill template by HJKOCH
...line. use a pencil or an awl to mark each on the holes unto where the base place will be mounted. then drill the holes if needed.
thingiverse
free
![Euro (concealed) Hinge Template by jaln](/t/8932459.jpg)
Euro (concealed) Hinge Template by jaln
...gure out your own depth stop.
do not drill through! 35mm (1/38") cup hole and screw holes should be 12mm (15/32") deep.
Cabinet
thingiverse
free
![Cabinet](/t/4976734.jpg)
Cabinet
...cabinet
thingiverse
a cabinet with the drawer closed
thingiverse
free
![Cabinet by leonk](/t/8958764.jpg)
Cabinet by leonk
...cabinet by leonk
thingiverse
cabinet
thingiverse
free
![Cabinet by leonk](/t/8957137.jpg)
Cabinet by leonk
...cabinet by leonk
thingiverse
cabinet
thingiverse
free
![Cabinet with no drawer](/t/4976687.jpg)
Cabinet with no drawer
...cabinet with no drawer
thingiverse
same cabinet but no drawer
thingiverse
free
![Cabinet Drawer](/t/4976612.jpg)
Cabinet Drawer
...cabinet drawer
thingiverse
the drawer by itself so you can have a functioning cabinet
thingiverse
free
![Cabinet peg by ProtoHD](/t/8112826.jpg)
Cabinet peg by ProtoHD
...cabinet peg by protohd
thingiverse
a cabinet peg to create an extra shelf in my shower cabinet.
thingiverse
free
![Cabinet handle by olo2000pm](/t/8022008.jpg)
Cabinet handle by olo2000pm
...cabinet handle by olo2000pm
thingiverse
cabinet handle
thingiverse
free
![cabinet hanger by findux](/t/8616426.jpg)
cabinet hanger by findux
...cabinet hanger by findux
thingiverse
cabinet hanger
thingiverse
free
![Cabinet Lock by kevingalvez12](/t/8701516.jpg)
Cabinet Lock by kevingalvez12
...cabinet lock by kevingalvez12
thingiverse
cabinet lock
thingiverse
free
![SHOE Cabinet by nagato](/t/8925052.jpg)
SHOE Cabinet by nagato
...shoe cabinet by nagato
thingiverse
shoe cabinet
Templates
thingiverse
free
![Norsaq Template](/t/4803704.jpg)
Norsaq Template
...norsaq template
thingiverse
template for norsaq
thingiverse
free
![Template by bketter5](/t/8960792.jpg)
Template by bketter5
...template by bketter5
thingiverse
this is a template for a countertop
thingiverse
free
![template 1](/t/4755813.jpg)
template 1
...template 1
thingiverse
drilling template for box1
thingiverse
free
![template 1590](/t/4755823.jpg)
template 1590
...template 1590
thingiverse
box drilling template
thingiverse
free
![A template by seanfto](/t/8291534.jpg)
A template by seanfto
...a template by seanfto
thingiverse
just a basic template for drawing parallel rows
thingiverse
free
![Screw Template](/t/4925309.jpg)
Screw Template
...screw template
thingiverse
screw hole template for wood screws/m4 screws
thingiverse
free
![Movement Template](/t/4701513.jpg)
Movement Template
...movement template
thingiverse
movement template for the tabletop game pacific rim extinction by river horse.
thingiverse
free
![Pivot Template](/t/4701514.jpg)
Pivot Template
...pivot template
thingiverse
pivot template for the tabletop game pacific rim extinction by river horse.
thingiverse
free
![Gaslands templates by Pokcz](/t/8282014.jpg)
Gaslands templates by Pokcz
...gaslands templates by pokcz
thingiverse
templates for gaslands!
thingiverse
free
![Troldtekt Template by LasseBang](/t/8354257.jpg)
Troldtekt Template by LasseBang
...troldtekt template by lassebang
thingiverse
troldtekt template
Drill
thingiverse
free
![Drill holder](/t/4890010.jpg)
Drill holder
...drill holder
thingiverse
drill holder for metric drills.
thingiverse
free
![drill by Syzguru11](/t/8269785.jpg)
drill by Syzguru11
...drill by syzguru11
thingiverse
drill
thingiverse
free
![drill by Syzguru11](/t/8271835.jpg)
drill by Syzguru11
...drill by syzguru11
thingiverse
drill
thingiverse
free
![Drill by redkidpavel](/t/8732386.jpg)
Drill by redkidpavel
...drill by redkidpavel
thingiverse
the drill
thingiverse
free
![Handheld Drill](/t/4978397.jpg)
Handheld Drill
...handheld drill
thingiverse
this handheld drill should fit any normal drill bit.
thingiverse
free
![Drill by raikayl](/t/9053903.jpg)
Drill by raikayl
...drill by raikayl
thingiverse
drill model
thingiverse
free
![Drills storage](/t/4790493.jpg)
Drills storage
...drills storage
thingiverse
drills storage on the wall.
thingiverse
free
![Breaching drill](/t/4875399.jpg)
Breaching drill
...breaching drill
thingiverse
hades breaching drill model.
thingiverse
free
![Drill Bit Clip for Power Drills by danielferal](/t/9674553.jpg)
Drill Bit Clip for Power Drills by danielferal
...drill bit clip for power drills by danielferal
thingiverse
bit holder that attaches to your drill.
thingiverse
free
![Drill Tray](/t/4750524.jpg)
Drill Tray
...to allow shaking without dropping drills over edges. also includes a spout for easy placing drills back into original containers.
Handle
thingiverse
free
![handle](/t/4978833.jpg)
handle
...handle
thingiverse
handle
thingiverse
free
![handle](/t/4973986.jpg)
handle
...handle
thingiverse
just a handle
thingiverse
free
![handle](/t/4709783.jpg)
handle
...handle
thingiverse
basic utencil handle
thingiverse
free
![Handle lid handle cooked by ovidiun](/t/8584603.jpg)
Handle lid handle cooked by ovidiun
...handle lid handle cooked by ovidiun
thingiverse
handle lid handle cooked , have inserted one nut m6
thingiverse
free
![Handle, Halter, Goodman Handle by Ralf01](/t/8078899.jpg)
Handle, Halter, Goodman Handle by Ralf01
...handle, halter, goodman handle by ralf01
thingiverse
this is a handle for one torch for diving
thingiverse
free
![Crank Handle](/t/4834045.jpg)
Crank Handle
...crank handle
thingiverse
crank handle for any application that needs a handle for turn.
thingiverse
free
![Handle, Halter, Goodman Handle by Ralf01](/t/8183742.jpg)
Handle, Halter, Goodman Handle by Ralf01
...handle, halter, goodman handle by ralf01
thingiverse
i designed this handle for my diving torch.
thingiverse
free
![handle by Avtonomys](/t/8372480.jpg)
handle by Avtonomys
...handle by avtonomys
thingiverse
handle
thingiverse
free
![Handle by Rustam](/t/8735882.jpg)
Handle by Rustam
...handle by rustam
thingiverse
handle
thingiverse
free
![Handle by TheBrunoSan](/t/8735168.jpg)
Handle by TheBrunoSan
...handle by thebrunosan
thingiverse
a handle