Thingiverse
C64 1084 Monitor Power Switch Mounting Bracket by sweetlilmre
by Thingiverse
Last crawled date: 4 years, 2 months ago
This is a bracket that mounts the power switch of a C64 1084 monitor to the power board mounting plate. It was designed as a replacement for the one in my monitor when I discovered that the original had broken due to age, during a switch replacement exercise.
Printing:
Fairly easy part to print, no support or rafts required. I printed in PLA, but ABS should work as well. As the part has a fairly tight tolerance in terms of the fit to the switch, use as fine a resolution as your printer can support (I printed using the 0.1 detail profile of PrusaSlicer).
This design and others can be found at: https://github.com/sweetlilmre/Useful_3D_Models and it is likely that you'll find the latest version there
The openscad file is supplied as well as the STL, suggestions welcome.
Printing:
Fairly easy part to print, no support or rafts required. I printed in PLA, but ABS should work as well. As the part has a fairly tight tolerance in terms of the fit to the switch, use as fine a resolution as your printer can support (I printed using the 0.1 detail profile of PrusaSlicer).
This design and others can be found at: https://github.com/sweetlilmre/Useful_3D_Models and it is likely that you'll find the latest version there
The openscad file is supplied as well as the STL, suggestions welcome.