C-Mount Adjustable Microscope Stand by Deacon1982

Last crawled date: 3 years ago

If you need the ideal settings for printing visit the original that i remixed this from as i used his settings.
I have a cheap x1000 digital microscope off eBay but needed a modified adaptor to use it. I then realised i wanted it to be more over the base plate so i basically cut out the middle part of :- Gear_Rack_Housing.stl and made :- Narrow_Gear_Rack_Housing.stl but it still was not quite right i am using it for SMD electronics so i adapted and added a lower bracket to hold the adaptor making :- Narrow_Top_Bottom_Gear_Rack_Housing.stl, so i can now use it close up or far away without having to change the part all i have to do is move the adaptor.I am at some point going to cut :- Gear_Rack_Housing.stl at a diagonal so i still have the full length but without it interfering with the circuit boards when lowered down, But thats a future project for not i have to crack on with what i have