Thingiverse
Buttonbox with mount for Fanatec Clubsport Wheelbase V2.5 by KarlToastbrot
by Thingiverse
Last crawled date: 4 years, 4 months ago
Pretty basic button box:
16x 12mm holes for 16 button
4x 7,5mm holes for 4 rotary encoders.
I printed mine with PLA and it flexes ~4mm on the far left side when pushing the left button.
You need:
2x M6x12 DIN 7991 (to mount the "mount" to the wheelbase)
7x M3x10 DIN 7991 (3 to mount the holder to the buttonbox box, 4 for the cover. Can be longer.)
16x buttons
4x rotary encoders
1x arduino micro
wires
soldering tool and skill
micro usb cabel
I would highly suggest to watch the tutorial by Amstudio: https://www.youtube.com/watch?v=Z7Sc4MJ8RPM
The Assembly of the box is straight forward. The holes for the M3 screws are 2.5mm. It is possible to screw them without preparation, although you need to push while turning.
I included the .f3d and a .step file, if you want to change anything.
16x 12mm holes for 16 button
4x 7,5mm holes for 4 rotary encoders.
I printed mine with PLA and it flexes ~4mm on the far left side when pushing the left button.
You need:
2x M6x12 DIN 7991 (to mount the "mount" to the wheelbase)
7x M3x10 DIN 7991 (3 to mount the holder to the buttonbox box, 4 for the cover. Can be longer.)
16x buttons
4x rotary encoders
1x arduino micro
wires
soldering tool and skill
micro usb cabel
I would highly suggest to watch the tutorial by Amstudio: https://www.youtube.com/watch?v=Z7Sc4MJ8RPM
The Assembly of the box is straight forward. The holes for the M3 screws are 2.5mm. It is possible to screw them without preparation, although you need to push while turning.
I included the .f3d and a .step file, if you want to change anything.