Thingiverse
Bulkhead fittings
by Thingiverse
Last crawled date: 6 years, 2 months ago
Bulkhead fittings are expensive where I live, so I made my own.
I have versions for 12mm (1/2") and 6mm (1/4") ID hose. More may come in the future.
Needs an O ring with ID 17mm and OD 20mm.
I recommend a 16mm drill for installing the bulkheads.
Printed in PLA and so far no leaks.
Added 9mm and 25mm fittings. The 25mm version needs an O ring with ID 34mm and OD 41mm. I haven't tested these two, so please use with caution.
I have versions for 12mm (1/2") and 6mm (1/4") ID hose. More may come in the future.
Needs an O ring with ID 17mm and OD 20mm.
I recommend a 16mm drill for installing the bulkheads.
Printed in PLA and so far no leaks.
Added 9mm and 25mm fittings. The 25mm version needs an O ring with ID 34mm and OD 41mm. I haven't tested these two, so please use with caution.