Thingiverse
Building Printer Concept Model by MCmaks
by Thingiverse
Last crawled date: 3 years ago
This is just concept modeling, not a "useful" thing.
Printed building concept:
By printing plastic on a large scale, buildings can be constructed with less labor, especially areas that typically require special trades. Specifically, electrical conduits, electrical boxes/gangs, plumbing/piping, and paint-free interior and exterior surfaces could be printed. Other features, including gutters, insulation cavities, stairs/railings, counters, sinks, and door/window (rough) framing could potentially be printed as well. (The labor of painters, plumbers, electricians, etc is significantly reduced). Also, the printed plastic serves as a print-in-place form that can be filled with concrete for strength. Finally, this should enable architectural designs that aren't currently practical/feasible. All the things below are related to this greater printed building concept (concrete bones and plastic skin, veins, nerves, etc).
Printed Building Concept -- Wall Section Models (Not this thing)
https://www.thingiverse.com/thing:2827034
Two STL files (conventional and new style), roughly full scale, not yet printed.
Models the primary features/advantages of the printed building concept.
Plastic as a print-in-place concrete form (concrete skeleton, plastic skin)
Printed (plastic) piping (no in-wall plumping labor)
Printed (plastic) electrical conduit, boxes, and fixtures
Labor-free finished interior and exterior surfaces (no siding, no painting)
Labor-free, printed gutter
Design flexibility
Conventional style (round pipes, schedule xx, compatible with current pipe/conduit/boxes)
New style, print friendly (rectangular pipe/conduit)
Other Building Printer Concept Models (This Thing)
https://www.thingiverse.com/thing:2828296
There's two competing requirements: First, printing plastic in a large volume and second, with enough "resolution" to enable fine features like plumbing and conduit. The things here model two "sketches" -- rough ideas -- for how to accomplish that. Both models use a very large delta (to achieve large volume, easy set-up) combined with a small Cartesian (to achieve fine resolution and high nozzle movement speed). This is very preliminary, just a rough idea, no real details (filament or pellets? probably pellets. Hopper or feed tube? Probably hopper. Material ... maybe PVC? Approach for supports? Lots of options, no clear winner. Time? Probably too slow, so maybe more suitable for large nozzle/no small features/or concrete printing.......).
Partially printed (PLA, 0.2mm layers, 15% infill), but not a priority for me to finish printing/building at this time ... WIP.
Building Printer Concept Model - Parallel Print Bots (Not this thing)
https://www.thingiverse.com/thing:2852345
A single hot end would most likely be painfully slow, so this approach uses distributed print bots to parallel the printing effort (12 bots animated, 24 hot ends). The bots are essentially scissor lifts with two arms to guide hot ends. (Rough ideas; plastic? maybe PVC. filament or pellets? maybe filament. local accuracy/precision? maybe stereo cameras, machine vision, printed guide marks at lower layers).
Modeled at roughly 1/80 scale. Ver B of STLs have small improvements, but haven't been printed. Part with "top" in the name (upper body) should probably be printed upside down (as oriented in ver B). Also, I only printed one set of arm assy parts and one set of scissor assy parts because they're the same assy twice each. I printed full scale, which then requires M2 x 4mm and M2 x 6mm machine screws. I filed/trimmed as needed and ran a 2mm drill through the thru holes. smaller holes are sized for M2 machine screw to be essentially self-tapping. Probably much easier to build printed 1.5X and assembled with M3 x 6mm and M3 x 9/10mm screws.
Printed Building Concept Model (Not this thing)
https://www.thingiverse.com/thing:2828645
Just a house in vertical sections to facilitate a rough simulation.
Thanks to Hans De Ridder and Joerg Schmit for the lowliner model, here: https://grabcad.com/library/mercedes-lowliner-1
Thanks to Saied Kabiri for the concrete mixer model, here: https://grabcad.com/library/concrete-mixer-machine-1
Printed building concept:
By printing plastic on a large scale, buildings can be constructed with less labor, especially areas that typically require special trades. Specifically, electrical conduits, electrical boxes/gangs, plumbing/piping, and paint-free interior and exterior surfaces could be printed. Other features, including gutters, insulation cavities, stairs/railings, counters, sinks, and door/window (rough) framing could potentially be printed as well. (The labor of painters, plumbers, electricians, etc is significantly reduced). Also, the printed plastic serves as a print-in-place form that can be filled with concrete for strength. Finally, this should enable architectural designs that aren't currently practical/feasible. All the things below are related to this greater printed building concept (concrete bones and plastic skin, veins, nerves, etc).
Printed Building Concept -- Wall Section Models (Not this thing)
https://www.thingiverse.com/thing:2827034
Two STL files (conventional and new style), roughly full scale, not yet printed.
Models the primary features/advantages of the printed building concept.
Plastic as a print-in-place concrete form (concrete skeleton, plastic skin)
Printed (plastic) piping (no in-wall plumping labor)
Printed (plastic) electrical conduit, boxes, and fixtures
Labor-free finished interior and exterior surfaces (no siding, no painting)
Labor-free, printed gutter
Design flexibility
Conventional style (round pipes, schedule xx, compatible with current pipe/conduit/boxes)
New style, print friendly (rectangular pipe/conduit)
Other Building Printer Concept Models (This Thing)
https://www.thingiverse.com/thing:2828296
There's two competing requirements: First, printing plastic in a large volume and second, with enough "resolution" to enable fine features like plumbing and conduit. The things here model two "sketches" -- rough ideas -- for how to accomplish that. Both models use a very large delta (to achieve large volume, easy set-up) combined with a small Cartesian (to achieve fine resolution and high nozzle movement speed). This is very preliminary, just a rough idea, no real details (filament or pellets? probably pellets. Hopper or feed tube? Probably hopper. Material ... maybe PVC? Approach for supports? Lots of options, no clear winner. Time? Probably too slow, so maybe more suitable for large nozzle/no small features/or concrete printing.......).
Partially printed (PLA, 0.2mm layers, 15% infill), but not a priority for me to finish printing/building at this time ... WIP.
Building Printer Concept Model - Parallel Print Bots (Not this thing)
https://www.thingiverse.com/thing:2852345
A single hot end would most likely be painfully slow, so this approach uses distributed print bots to parallel the printing effort (12 bots animated, 24 hot ends). The bots are essentially scissor lifts with two arms to guide hot ends. (Rough ideas; plastic? maybe PVC. filament or pellets? maybe filament. local accuracy/precision? maybe stereo cameras, machine vision, printed guide marks at lower layers).
Modeled at roughly 1/80 scale. Ver B of STLs have small improvements, but haven't been printed. Part with "top" in the name (upper body) should probably be printed upside down (as oriented in ver B). Also, I only printed one set of arm assy parts and one set of scissor assy parts because they're the same assy twice each. I printed full scale, which then requires M2 x 4mm and M2 x 6mm machine screws. I filed/trimmed as needed and ran a 2mm drill through the thru holes. smaller holes are sized for M2 machine screw to be essentially self-tapping. Probably much easier to build printed 1.5X and assembled with M3 x 6mm and M3 x 9/10mm screws.
Printed Building Concept Model (Not this thing)
https://www.thingiverse.com/thing:2828645
Just a house in vertical sections to facilitate a rough simulation.
Thanks to Hans De Ridder and Joerg Schmit for the lowliner model, here: https://grabcad.com/library/mercedes-lowliner-1
Thanks to Saied Kabiri for the concrete mixer model, here: https://grabcad.com/library/concrete-mixer-machine-1
Similar models
thingiverse
free
Building Print Bots - Printed Building Concept by MCmaks
...rcedes-lowliner-1
thanks to saied kabiri for the concrete mixer model, here: https://grabcad.com/library/concrete-mixer-machine-1
thingiverse
free
Printed Building Concept - Home Model by MCmaks
...100mm. hasn't been printed/tested. maybe useful for dollhouse or similar printed building concept -- wall section models (not this...
thingiverse
free
Printed Building Concept - Wall Section Models by MCmaks
...el (not this thing)
https://www.thingiverse.com/thing:2828645
just a house in vertical sections to facilitate a rough simulation.
thingiverse
free
Conduit Mounting Bracket by triton_9
...ild a crane/claw machine out of nema17s and conduit pipe.
more pieces can be found here:https://www.thingiverse.com/thing:2859618
thingiverse
free
Replacing for "IKEA Samla - Filament enclosure with passages" by EugK
...w.thingiverse.com/thing:1461750
for 32.3mm plastic pipe.
added pipe stand in new design: http://www.thingiverse.com/thing:1799292
thingiverse
free
Conduit Crane Machine NEMA17 Axis Mount by triton_9
...58174
and conduit mounting brackets from this:https://www.thingiverse.com/thing:2862307
will post rest of machine as it is built.
grabcad
free
HOT AIR DRYER "LUXOR HD 600"
...hot air dryer "luxor hd 600"
grabcad
hot air dryer for plastic pellets
thingiverse
free
Dark Nights: Metal - The Murder Machine Emblem by FinePrint3D
...thing:2812599
the dawnbreaker: https://www.thingiverse.com/thing:2805610
the merciless: https://www.thingiverse.com/thing:2813230
thingiverse
free
3/4" EMT Conduit end plug for MPCNC by KB1FCH
...giverse.com/thing:1885144 sized to fit standard us 3/4" emt conduit. made to protect wires running through conduit on mpcnc.
thingiverse
free
3/4" conduit cutting jig by idig3d
... reciprocating saw with the jig temporarily screwed into my wooden deck.
if you find this useful, please encourage me with a tip.
Mcmaks
thingiverse
free
Laptop lady by MCmaks
... pillar supports in slic3r ... be careful with the sun when removing the supports. silhouette filled with white correcting fluid.
thingiverse
free
Remix RepRap Discount case -- For 2020 Mount FLSun i3 by MCmaks
...remix reprap discount case -- for 2020 mount flsun i3 by mcmaks
thingiverse
mounting holes for 2020 plus lcd wire guides.
thingiverse
free
Weighted number blocks -- Slide version by MCmaks
...in/out. nickels (us) can be used to weight blocks proportionally. compatible with scale:https://www.thingiverse.com/thing:2517509
thingiverse
free
Triangle Properties Learning Aid -- Big version by MCmaks
...mm side lengths.
** i haven't printed this yet -- work in progress.
small version: https://www.thingiverse.com/thing:2519895
thingiverse
free
Closet organizer clips by MCmaks
...ve versions may be easier to print (no support issues), but may need to be painted to have adequate contrast inside dark closets.
thingiverse
free
Whiteboard compass by MCmaks
...arent-hanger-kitchen-bathroom-suction-cup-sucker-20mm/311566424293?sspagename=strk%3amebidx%3ait&_trksid=p2060353.m2749.l2649
thingiverse
free
Whiteboard game spinner by MCmaks
...arent-hanger-kitchen-bathroom-suction-cup-sucker-20mm/311566424293?sspagename=strk%3amebidx%3ait&_trksid=p2060353.m2749.l2649
thingiverse
free
2020 RA Spool Holder with Filtered Filament Guide by MCmaks
...ll piece of foam (10mm x 10mm x 5mm uncompressed) with a hole punched in the middle. filament guide has supports in the stl file.
thingiverse
free
Triangle Properties Learning Aid by MCmaks
...version in the works: https://www.thingiverse.com/thing:2520435
i used no supports or bed adhesion, 0.2mm layer height, i3 clone.
thingiverse
free
Stackable file paper holder organizer - pencil struts by MCmaks
...(1.375" x 1.875"); cut card stock or use small self-stick note. scrap cardboard for the platforms; i used a cereal box.
Concept
3d_export
$5
concept house
...concept house
3dexport
concept house blend.
turbosquid
$20
concept
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
concept
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Concept
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Concept
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Bo concept
...bo concept
3ddd
boconcept , декоративный набор
bo concept
3d_ocean
$45
Dreamcar concept
...cept cars from the past.before i became 3d modeler i sketched a lot futuristic cars.when i want it to look more realistic,i st...
3d_ocean
$49
Buggy Concept
... poly massive outdoor robust vehicle
just a model of are own buggy concept vehicle. maybe you can make a beautiful renders of it!
3d_export
free
concept s ii
...concept s ii
3dexport
concept car
3d_export
free
concept s iii
...concept s iii
3dexport
concept car
Printer
archibase_planet
free
Printer
...inter
archibase planet
printer laser printer pc equipment
printer n120614 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Printer
...rchibase planet
laser printer office equipment computer equipment
printer - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$100
Printer
...er
turbosquid
royalty free 3d model printer for download as on turbosquid: 3d models for games, architecture, videos. (1487819)
turbosquid
$3
Printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1670230)
turbosquid
$1
printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1595546)
turbosquid
$1
printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1595105)
turbosquid
$10
Printer
...id
royalty free 3d model printer for download as max and 3dm on turbosquid: 3d models for games, architecture, videos. (1607146)
turbosquid
$7
Printer
...royalty free 3d model printer for download as ma, ma, and obj on turbosquid: 3d models for games, architecture, videos. (1644580)
turbosquid
$30
Printer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Printer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Building
archibase_planet
free
Building
...building high-rise building office building construction
building n050115 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
3d_export
$5
building
...building
3dexport
clasic building
3ddd
$1
building
...building
3ddd
здание
building
archibase_planet
free
Building
...lanet
building office office building construction
building n090914 - 3d model (*.gsm+*.3ds+*.max) for exterior 3d visualization.
archibase_planet
free
Building
...net
building tower construction high-rise building
building n100214 - 3d model (*.gsm+*.3ds+*.max) for exterior 3d visualization.
3d_export
free
Building
...building
3dexport
low poly building;
3d_export
free
Building
...building
3dexport
low poly building;
3d_export
free
Building
...building
3dexport
low poly building;
3d_export
free
Building
...building
3dexport
low poly building;
3d_export
free
Building
...building
3dexport
low poly building;