Budget and Better than DJI! 3D Printed/ Laser Cut 10" Drone

Last crawled date: 5 years, 6 months ago

This is a work in progress, All 3d printed parts are made from PETG. I haven't tried the laser cut plates but as far as i know they will work.
3D Printed Parts Required:
4x Arm to Body Clamp Bottom
4x Arm to Body Clamp Top
1x 3D Printed Top Plate
1x 3D Printed Bottom Plate
2x Leg Coupler
2x Leg Mount
4x Leg Foot
4x Motor Mount Top
4x Motor Mount Bottom
Additional Parts:
1m Aluminium Tube cut into 4x 22mm lengths (9mm hole drilled into the motor mount space - as seen in pictures)
If you are laser cutting the plates you'll need 16x Laser Cut Bottom Plate Nut Holder. This slots into the hexagon holes in the Bottom plate and holds the nuts in place.
Electronics I used:
4x T-Motor 2216 11 900kv Motors
Mamba F405 Stack
BN880 GPS
BMP280 Barometer
4000mah 3s Lipo