Thingiverse
brushless gimbal by muellerr_ch
by Thingiverse
Last crawled date: 4 years, 1 month ago
this is my first brushless gimbal for a mobius camera.
the motors and the controller are from rctimer:
2804-100T brushless gimbal motor
2-axis brushless gimbal controller & imu v1.0
additional parts are:
anti-vibration rubber balls from rctimer
ball bearing 8x4x3 mm
bolt m4 x 10 mm
nut m4
the controller software is from here:http://sourceforge.net/projects/brushless-gimbal-brugi/
here are a few movies with the gimbal in action.http://youtu.be/fo5YV5kvk_Qhttp://youtu.be/WvwDGBNRNxshttp://youtu.be/uUQwaLmqgO4http://youtu.be/MbdtZ-Mk_3E
update:
arm2_final_v2 is an updated version, that adds a bit more space for the sensor module unter the camera.
arm1_final_v2 is an updated version, with less imbalance on the roll axis, in case the camera is attached to the frame without additional weight from alpha gel pads.
arm3_final_v2 added hole for zip tie (idea by marhar).
the motors and the controller are from rctimer:
2804-100T brushless gimbal motor
2-axis brushless gimbal controller & imu v1.0
additional parts are:
anti-vibration rubber balls from rctimer
ball bearing 8x4x3 mm
bolt m4 x 10 mm
nut m4
the controller software is from here:http://sourceforge.net/projects/brushless-gimbal-brugi/
here are a few movies with the gimbal in action.http://youtu.be/fo5YV5kvk_Qhttp://youtu.be/WvwDGBNRNxshttp://youtu.be/uUQwaLmqgO4http://youtu.be/MbdtZ-Mk_3E
update:
arm2_final_v2 is an updated version, that adds a bit more space for the sensor module unter the camera.
arm1_final_v2 is an updated version, with less imbalance on the roll axis, in case the camera is attached to the frame without additional weight from alpha gel pads.
arm3_final_v2 added hole for zip tie (idea by marhar).