Thingiverse
Box with divided compartments by EarlPrinter
by Thingiverse
Last crawled date: 3 years ago
This is a box that I designed as I wanted something that gave had a lot of individual compartments in it of varying sizes. Is now used by my better half as a jewellery box.
I printed this box using Black PLA filament from http://www.3dexfilament.co.uk and used a layer height of 0.2mm and an infill of 15% but infill is not much of a problem so you could go to 10%. The lid is a fraction narrower than the box so that it easily slides in and out (I found with most other boxes on here that the lid was too tight fitting). I used a nozzle temperature of 200 degrees and a bed temperature of 70 degrees. Does not need any supports.
Please let me know how you get on with printing this. All feedback is welcome!
I printed this box using Black PLA filament from http://www.3dexfilament.co.uk and used a layer height of 0.2mm and an infill of 15% but infill is not much of a problem so you could go to 10%. The lid is a fraction narrower than the box so that it easily slides in and out (I found with most other boxes on here that the lid was too tight fitting). I used a nozzle temperature of 200 degrees and a bed temperature of 70 degrees. Does not need any supports.
Please let me know how you get on with printing this. All feedback is welcome!
Similar models
thingiverse
free
Sliding lid box (print in place) by refridgiraider
...y refridgiraider
thingiverse
print it lid down. has a divider in the middle so the lid closes one of the compartments at a time.
thingiverse
free
Mx SMD component box by Maxint
...e box to release one or more items.to fill the box, you can either take the lid off, or use the compartment opening on the side.
thingiverse
free
Replacement box lid clip by moradoshinigami
...how it works for you.
made with tinkercad.
edit: already had to edit the file to close a gap at the top i never noticed at first.
thingiverse
free
Decorative Box by Devmiser
... i printed the lid on its side with support enforcements inside only, i.e. not on the decorative side.
printed on a prusa mini+
thingiverse
free
Compartmented box with separate lids by DigitalMonk
...eded random access to a particular compartment, this may not be for you.
(see important notes in the post-printing section below)
thingiverse
free
Jewelry box by adihtc
... if you want to print in 2 colors.
if you need i can upload the lid with extra text on the lid, just let me know in the comments.
thingiverse
free
Sliding lid box (Ox Box) by Sonic_Ox
...and don't require a lot of filament. i think they make great gifts or even "business cards" with the right design.
thingiverse
free
Friction Fit Pokemon Box by Brodmann
...the lid without the logo, just in case you aren't printing this for pokemon cards.
update:
i added a box without the divider.
thingiverse
free
Small Box with Hinged Lid by odie_wan
...int it with fairly low infill, but don't go too hollow on the lid so it doesn't break when snapping it on or off the box.
thingiverse
free
Digital Temperature/Humidity Gauge Holder
...l.
i was able to print this without supports, but if your printer has problems bridging, you might consider adding some supports.
Earlprinter
thingiverse
free
ImmersionRC 250mw Transmitter holder by EarlPrinter
...0mw transmitter holder by earlprinter
thingiverse
this is a video transmitter holder built for an immersionrc 250mw transmitter.
thingiverse
free
ImmersionRC 600mw Video Transmitter Holder by EarlPrinter
...nsmitter holder by earlprinter
thingiverse
this is a video transmitter case designed for an immersionrc 600mw video transmitter.
thingiverse
free
Durafly Logo by EarlPrinter
...mperature was 200deg and bed temperature was 70deg. as the part is unlikely to be subject to much stress i used an infill of 10%.
thingiverse
free
Naze32 Case by EarlPrinter
...is with a layer height of 0.2mm and a fill of 10%. depending on what rc gear you use some trimming of this print may be required.
thingiverse
free
5x3 Propeller by EarlPrinter
...nts in the best quality when you rotate the model in your slicer by 90deg so that the prop arc is perpendicular to the build bed.
thingiverse
free
Simple iPhone 6/6Plus Stand by EarlPrinter
... can see all of the screen.
printed using a layer height of 0.25mm/70mmps (as i wanted speed over quality) and an infill of 10%.
thingiverse
free
Box with working lid by EarlPrinter
...risingly good results. i would recommend around this mark for optimum printing.
dimensions are: l: 60mm w:40mm h:30mm
enjoy!
thingiverse
free
3D Printed Keyring Ice Scraper by EarlPrinter
... settings of 0.1mm layer height, infill of 20%, and a hot nozzle temperature.
i printed this in pla but abs would work well too.
thingiverse
free
Lyme Park by EarlPrinter
...r 25%. also watch out for warping which can occur with large prints. to print this model it takes approximately 2.5hours.
enjoy!
Compartments
3d_export
$20
case-compartment
...case-compartment
3dexport
two door case-compartment for clothes
turbosquid
$20
ase compartment
...id
royalty free 3d model ase-compartment for download as max on turbosquid: 3d models for games, architecture, videos. (1398346)
turbosquid
$18
Case-compartment
...d
royalty free 3d model case-compartment for download as max on turbosquid: 3d models for games, architecture, videos. (1474670)
turbosquid
$5
wardrobe compartment
...oyalty free 3d model wardrobe compartment for download as max on turbosquid: 3d models for games, architecture, videos. (1701912)
3d_export
free
case-compartment
...case-compartment
3dexport
turbosquid
$2
Case-compartment
...e 3d model case-compartment for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1152135)
3d_export
$10
wardrobe compartment
...wardrobe compartment
3dexport
wardrobe with mirrors on the doors
turbosquid
$10
Duplex compartment
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
Case-compartment
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$15
Closet of compartment 3D Model
...closet of compartment 3d model
3dexport
closet of compartment
closet of compartment 3d model alexleg 83419 3dexport
Divided
3d_ocean
$5
Room divider
...room divider
3docean
divider room
a high quality room divider .
3d_ocean
$5
Room divider
...room divider
3docean
divider room
a high quality room divider.
3d_ocean
$5
Room divider
...room divider
3docean
divider room
a high quality room divider.
3d_ocean
$5
Room divider
...room divider
3docean
divider room
a high quality room divider.
3d_ocean
$5
Room divider
...room divider
3docean
divider room
a high quality room divider .
3d_ocean
$5
Room divider
...room divider
3docean
divider room
a high quality room divider
3d_ocean
$5
Room divider
...room divider
3docean
divider room
a high quality room divider.
3d_ocean
$5
Room divider
...room divider
3docean
divider room
a high quality room divider.
3d_ocean
$5
Room divider
...room divider
3docean
divider room
a high quality room divider .
3d_ocean
$5
Room divider
...room divider
3docean
divider room
a high quality room divider
Box
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box 2 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
carton cardboard box box
box 1 - 3d model (*.3ds) for interior 3d visualization.
3d_export
$6
box
...box
3dexport
box
3d_export
$5
Box
...box
3dexport
box
3d_export
$5
box
...box
3dexport
box
3d_export
$5
box
...box
3dexport
box
archibase_planet
free
Box
...box
archibase planet
box box for paper notebook pencil
box - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box n170111 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box n050411 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Boxes
...boxes
archibase planet
boxes box case bin
boxes n281213 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.