Box for MEGA + RAMPS for installation on a frame from an aluminum profile of 20 x 20 mm. by u-maker 3d model
3dmdb logo
Thingiverse
Box for MEGA + RAMPS for installation on a frame from an aluminum profile of 20 x 20 mm. by u-maker

Box for MEGA + RAMPS for installation on a frame from an aluminum profile of 20 x 20 mm. by u-maker

by Thingiverse
Last crawled date: 3 years, 1 month ago
Box for MEGA2560 and RAMPS 1.4 for installation on frame made of aluminum profile 20 x 20 mm.
Dimensions of the box on the outside: width 130 mm, height 90 mm, depth 70 mm.
It is assumed that two 50 x 50 mm fans will be installed to blow out the boards.
The green power socket on the RAMPS board is to be removed, followed by soldering the wires to the board. Or the contacts can be neatly aligned, and the connector can be rotated 90 degrees up.
Halfs of the box is twisted with four M3 x 40 mm screws.
The height of the layer is 0.16 mm.
The nozzle is 0.4 mm.
The print speed is 50 mm / s.
Plastic - ABS.
Filling - 100%.

Tags