Thingiverse
Box for eachine Lizard 95 (Version 2 with RunCam MicroSwift) by MegaCadler
by Thingiverse
Last crawled date: 4 years, 12 months ago
This is my improved version of the Box for Lizard 95 (previous version see https://www.thingiverse.com/thing:2472510 )
Most of all the Box was changed to fit for my modified Lizard 95 with a RunCam Micro Swift plus an ATX03 transmitter.
But it still fits to the stock model, rather more I added some options for this.
The empty space around the Skid is now used as additional spare parts box.
The closing "Bottom_Case_Closing.stl" is fixed with the part "Snap.stl" that must be mounted with an M3 screw at the bottom part "Case_bottom_Skid.stl".
For those who don't use my Landing Skid (https://www.thingiverse.com/thing:2472520) I have provided a smaller bottom case with some fixtures (Case_bottom_woSkid.stl).
If you want to create other parts around the Lizard I provided my simplified Lizard model as .stl and .obj.
Changing the stock camera to a RunCam Micro Swift is very easy:
remove the cfk camera holder and reinstall it by rotation of 180° (so that the original camera would look backwards)
remove the stock camera
mount the printed part "ATX03_Antenna_holder" in the upper holes where the stock camera was fixed.
mount the TX03 transmitter with some potection foam and a cable tie. The antenna position can be moved up and down as you like.
drill a 2mm hole in the middle of a spare bolt and mount the Micro Cam with its frame here using an M2 srew and mount them on the cfk parts as shown on the pictures.
Most of all the Box was changed to fit for my modified Lizard 95 with a RunCam Micro Swift plus an ATX03 transmitter.
But it still fits to the stock model, rather more I added some options for this.
The empty space around the Skid is now used as additional spare parts box.
The closing "Bottom_Case_Closing.stl" is fixed with the part "Snap.stl" that must be mounted with an M3 screw at the bottom part "Case_bottom_Skid.stl".
For those who don't use my Landing Skid (https://www.thingiverse.com/thing:2472520) I have provided a smaller bottom case with some fixtures (Case_bottom_woSkid.stl).
If you want to create other parts around the Lizard I provided my simplified Lizard model as .stl and .obj.
Changing the stock camera to a RunCam Micro Swift is very easy:
remove the cfk camera holder and reinstall it by rotation of 180° (so that the original camera would look backwards)
remove the stock camera
mount the printed part "ATX03_Antenna_holder" in the upper holes where the stock camera was fixed.
mount the TX03 transmitter with some potection foam and a cable tie. The antenna position can be moved up and down as you like.
drill a 2mm hole in the middle of a spare bolt and mount the Micro Cam with its frame here using an M2 srew and mount them on the cfk parts as shown on the pictures.