Bowden setup for i3 by pacific_motion

Last crawled date: 3 years ago

UPDATE 18/12/2015
Added clamps that go to the front and back of y threaded rods. With all 6 clamps secured the frame and whole printer becomes much more rigid and less prone for vibrations. Which should result in better prints at high speeds.
ORIGINAL
This is my Bowden setup made for Electron 3d (migbot) Prusa i3.
I'm using it with E3D lite 6 hotend and it works great.
I also added .ipt inventor files if you want to edit parts.
Bowden carriage has a 3 hole setup that goes together with electron 3d (migbot) x carriage.
There is also a fan nozzle / vent for 50mm fan, and auto bed leveling sensor (green boxy one) that comes with printer.
The exhaust hole on the 50mm fan duck is a bit small so I made it a bit bigger with the knife.
All parts can be printed with out support. Also the teeth are there only as support for printing. They should be removed after the printing.
Bowden extruder frame holder part is the part that makes possible to mount the extruder to the frame on the existing holes. It is made for airtripper extruder model