Thingiverse
Bowden dual/quad extrusion extruder (single-nozzle single-drive) for MG995 SERVO by serandre
by Thingiverse
Last crawled date: 3 years, 1 month ago
This remix will accept a MG995(R) Servo, This Servo is MUCH MUCH more cheaper than the ones used in original design (and have more torque also). Also I'm including changes to make a QUAD extrusion in Marlin 2.0.5.3 (tested and working !!!).
UPDATED (05/27/2020): Added a NEW idler MUCH STRONGER, this new idler uses two (2) M3 nuts for the spring screws, and one (1) nut for the bearing. This new design makes the construction more stronger to hold the screws in the idler. For the spring screw you should use a top washer and nut to tighten the screw in place.
UPDATED (05/27/2020): New body makes easy to tight the PC4-M5 fittings, MUCH STRONGER too.
Changes in MARLIN 2.0.5.3 to use 2 or 4 filaments:
In Configuration.h look for:
Uncomment the line bellow:
//#define SINGLENOZZLE
Ucomment the SWITCHING EXTRUDER line bellow and change the angles.
// A dual extruder that uses a single stepper motor
//#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 120, 45 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif
Also make sure you define the SERVOS for your board:
#define NUM_SERVOS 4 // MKS Gen 1.4 supports 4 servos
Just uncomment the block above and setup the angles. You can have 4 filaments using just 2 stepper motors. Just not forget to activate your servos in the final of the configuration.h.
SLICING YOUR MODELS FOR 2/4 FILAMENTS:
Use Filament switch post-processor for Simplify 3D (3.1.1, 4.0.x) and Prusa Slic3r (1.36.2,1.37.1,1.38.6), you can download from here: https://github.com/spegelius/filaswitch
It prints perfectly, of course you need to fine tune the settings for your hardware.
UPDATED (05/27/2020): Added a NEW idler MUCH STRONGER, this new idler uses two (2) M3 nuts for the spring screws, and one (1) nut for the bearing. This new design makes the construction more stronger to hold the screws in the idler. For the spring screw you should use a top washer and nut to tighten the screw in place.
UPDATED (05/27/2020): New body makes easy to tight the PC4-M5 fittings, MUCH STRONGER too.
Changes in MARLIN 2.0.5.3 to use 2 or 4 filaments:
In Configuration.h look for:
Uncomment the line bellow:
//#define SINGLENOZZLE
Ucomment the SWITCHING EXTRUDER line bellow and change the angles.
// A dual extruder that uses a single stepper motor
//#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 120, 45 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif
Also make sure you define the SERVOS for your board:
#define NUM_SERVOS 4 // MKS Gen 1.4 supports 4 servos
Just uncomment the block above and setup the angles. You can have 4 filaments using just 2 stepper motors. Just not forget to activate your servos in the final of the configuration.h.
SLICING YOUR MODELS FOR 2/4 FILAMENTS:
Use Filament switch post-processor for Simplify 3D (3.1.1, 4.0.x) and Prusa Slic3r (1.36.2,1.37.1,1.38.6), you can download from here: https://github.com/spegelius/filaswitch
It prints perfectly, of course you need to fine tune the settings for your hardware.
Similar models
thingiverse
free
Bowden dual/quad extrusion extruder (single-nozzle single-drive) for MG995 SERVO by serandre
... } // angles for e0, e1
you will have to change to:
#define singleswitch_extruder_servo_angles { 150, 30 } // angles for e0, e1
thingiverse
free
Switching nozzle mount for Bowden extruders by fixoid
...s { 20, 137 } // angles for e0, e1//#define hotend_offset_z { 0.0, 0.0 } #endif
..#define temp_sensor_1 1
..#define num_servos 1
thingiverse
free
Direct drive dual extruder (single-nozzle and single-drive) by BigSteve
...rubber bands electrical parts 1 mini servo hs-225 or similar with accessories (arms and mounting parts) 1 nema17 stepper...
thingiverse
free
Sigma3d Extruder With Filament Runout Sensor by serkanc
...pin
19 for z max pin
in configuration.h enable the filament_runout_sensor, uncomment the first line,
fil_runout_inverting = false
thingiverse
free
Tevo Tarantula Filament Runout Sensor Enclosure by stylesuxx
...ad file is attached and may be customized via customizer in case you want to adapt it for a different switch, or your tolerances.
cults
free
Filament Sensor Case & Setup Info/Settings
...l_runout_pin 11 // stock setting was 4. changed to 11 for pin d11 on the motherboard.
this works even when using octoprint.
thingiverse
free
JGaurora A5 A5S Direct Drive stock extruder by alxdom
...extruder, pin 1and 2 or pin 3 and 4, to reverse the rotation.. not recommended
need 3x m3 30 for extruder and motor
200c/60c
60ms
thingiverse
free
NSTT Extruder by Paciente8159
...gure the e steps/mm to about 440. test it and adjust.
enjoy your new geared extruder. the printing quality on this is worth it!!!
thingiverse
free
Creality Ender 3 Extruder Remix V2 by FerociousDesigns
...o use this!
this thing is based off of the files from crealitys github. fusion file included so you can remix it if you want to!
thingiverse
free
Y belt tensioner for 2020 and 2040 aluminum extrusion by FFranzmann
...f prusa and haribo mod designs
you need to drill a hole for the m4 in your extrusion
added a version for 2020 although untested.
Serandre
thingiverse
free
MKS GEN 1.4 Case with Full Graphic Smart Controller and 80mm Fan by serandre
...and advise to use it.
customized case: i'm open to build a custom remix case for other boards (for a price), just contact me.
thingiverse
free
Clip to mount the rumba case on a Kossel / Delta Printer by serandre
...t fits perfetcly in a delta printer with 2020 extrusions in the bottom of the printer. look the pictures to see how nice it fits.
thingiverse
free
Tapered thread bowden coupling PC4-M5, PC4-M6, PC4-M10 by serandre
...o keep the heatsink block in place without any screw !!! it works really good and the heatsink block keeps very strong in place !
thingiverse
free
Stepper mount for 2020 rail flat print VERTICAL MOUNT by serandre
...thingiverse
this remix will let you mount your stepper in the vertical tower aluminum extrusion instead of the horizontal mount.
thingiverse
free
Bowden dual/quad extrusion extruder (single-nozzle single-drive) for MG995 SERVO by serandre
... } // angles for e0, e1
you will have to change to:
#define singleswitch_extruder_servo_angles { 150, 30 } // angles for e0, e1
thingiverse
free
MKS Robin E3 E3D Case for Prusa Bear by serandre
...rusa bear full mount.
the case has been remixed to use a 40mm fan on the case door.
case fully tested as you can see on pictures.
thingiverse
free
DELTARUNNER Centering Guide Remix by serandre
...for deltarunner is used on aluminum extrusion 2020. it's a snap fit that will perfectly center the face on the carriage base.
thingiverse
free
DELTARUNNER Base remix by serandre
...deltarunner base remix by serandre
thingiverse
remix for deltarunner base m5.
thingiverse
free
MKS MOSFET v1.0 case by serandre
... serandre
thingiverse
mks mosfet v1.0 or clones case as sold in aliexpress.com, with support to hold on 20x20 aluminium profile.
Mg995
thingiverse
free
RC Simple Drift car by Hendrikx
...parts: 3d printed parts brushless motor esc 30amp servo mg995 tower pro battery 3s remote control and receiver onoff...
thingiverse
free
Modular Robotic System - Standard Servo Hinge Joint by Didis_MakerIndustries
...mg996r or mg995. materials needed: -- 1x mg996r or mg995 servo incl. attachments -- 8x 2x6mm self tapping screws...
thingiverse
free
Neck mechanism for animatronics and puppets by Hendrikx
...arduino or rc, https://youtu.be/1nalpkerztm list of parts: 3x servo mg995 or similar 4x ball joint 3mm x 3mm (both...
thingiverse
free
Robot Arm by BriT_1969
...scaled from an abb irb660. you will need 3x mg995 servos and1 x sg90 servo. you will need 6...
thingiverse
free
MG995 Servo Bottom Lid With An Axle by RolandThsive
... you can spare 20 cents on paypal for me that would be awesome.
my school is very expensive ahahha.
paypal.me/rolandthsive
rohit
thingiverse
free
Filament-Cutter by technik_gegg
...without first). as for the servo, i've used an mg995 initially but replaced it by an amewi dc5821lv because...
thingiverse
free
11g Servo arm fitting by Tomclo
...aware to use it for a servo like the mg995 or mg996. because they have higher torque the spline...
thingiverse
free
mg995 and rotator casing for door lock by CrashCrafter
...he designs are slightly too small for the mg995 and its corresponding wing. however, you can use sandpaper to make the mg995 fit.
thingiverse
free
omni60mm by imaicom
...omni60mm by imaicom thingiverse design details:https://twitter.com/imaicom/status/1293110787817353216https://twitter.com/imaicom/status/1293682176362287104 https://denshiman.com/mg995htmlhttps://denshiman.com/robot.html ...
thingiverse
free
omni50mm by imaicom
...omni50mm by imaicom thingiverse design details:https://twitter.com/imaicom/status/1293110787817353216https://twitter.com/imaicom/status/1293682176362287104 https://denshiman.com/mg995htmlhttps://denshiman.com/robot.html ...
Bowden
3ddd
$1
Manooi Artica
...and pendants in various sizes and forms. suspension: galvanized bowden - dia. 1,5 mm. bulb: max 60 w -...
turbosquid
$199
Vintage Ben Bowden Spacelander bike
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
thingiverse
free
Tronxy X5SA Extruder holder by railer1000
...x5sa extruder holder by railer1000 thingiverse to reduce the bowden pipe length i designed a small holder which can...
thingiverse
free
Sidewinder X1 Bowden holder by CRYSIS-FPV
... you are running the sidewinder x1 - z brace by double_mirages it will help as i run the ptfe tube through the brace.
see photos.
thingiverse
free
Hero Me Gen 5 base for Dragon Hotend by alwayshungry8
...mounting collar uses the original m2.5 screw hardware and bowden collet mounts using 4 mounting screws instead of 2...
thingiverse
free
Direct drive extruder for FLSUN Cube by tato_713
...in these 4 parts. this set replaces the original bowden tube, both ends coupling, and the original feeder support;...
thingiverse
free
Flight Rudder (yaw) pedals for the PS4 DualShock Joystick HOTAS / HOSAS by jpnurro
...the control cable use filament (petg preferred) with the bowden tube. glue (cyanoacrylat) the the filament in to yaw...
thingiverse
free
Tronxy X5S rotating extruder arm by antosha99
...axis. with this extruder brace you can shorten your bowden and easily reach all the corners of the 400...
thingiverse
free
Ender 3 nut extruder by The_Ninjaneer
...3 nut extruder by the_ninjaneer thingiverse does your stock bowden coupling let your tube go mid print? just use...
thingiverse
free
Top Filament Holder 2020 6SE, Ender 3, CR-10, Chiron by Br0tein
...work with any 2020 extrusion. works flawlessly with a bowden setup or a direct drive. the roller has been...
Servo
3d_export
$5
Servo 3D Model
...rvo 3d model
3dexport
servo
servo 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl pasqualesiciliano 104590 3dexport
3d_export
$79
Japanese Hexapod Robot Kondo KMR-M6 3D Model
...4-leg 6-leg 4-legged 6-legged kmr-6 hexapod kondo multi hobbyist servo four six japanese hexapod robot kondo kmr-m6 3d model...
3d_export
$20
high-speed tabletting machine n95 full servo 3d 2d bom 120 pieces per minute
...servo 3d 2d bom 120 pieces per minute
3dexport
high-speed tabletting machine n95 full servo 3d + 2d + bom, 120 pieces per minute
3d_export
free
russian reversible motor rd-09
...is used to operate as an executive motor in servo systems of automatic devices, gaming machines, electric grills, dispensers...
3d_export
$40
cup type mask machine n95 bowl type mask machine
...damage to material, easy and qualified filtering function 3. servo shift, accurate positioning, imported cutting tools, cutting edge oil...
3d_export
$120
7 axis servo ear loop welding machine
... servo ear loop welding machine
3dexport
7 axis servo ear loop welding machine is made sw2020<br>bom and plc are included.
3d_export
$15
automobile wiring harness clamp packaging
...structures, such as lead screw drive, synchronous belt drive, servo motor drive, cylinder drive, hot pressing sealing and plastic...
3d_export
$12
automatic paper cutting machine with cutter
...control, frequency control and touch screen operation (siemens brand)<br>(3) servo motor drive<br>(4) servo motor controls feeding to provide correct...
3d_export
$150
high speed mask earloop welding machine all servo motor
...ll servo motor
3dexport
servo motor working mask ear loop welding machine<br>files is only 3d (step & solidworks 2015)
3d_export
$16
sc300 pillow packing machine mask packing machine
...edge and other positions cheng, the machine by 2 servo and a variable frequency motor for power, is the...
Extrusion
3d_export
$300
melt-blown fabric extrusion molding machine
...an email to me.<br>designed with solidworks 2017, render with photoview 360<br>**************************************
3d_export
$10
glue injection machine
...injection technology. the ordinary glue injection machine is screw extrusion type, and its instantaneous pressure can reach more than...
3d_export
$7
wireline
...from the ceiling, the cable holds a ribbed glass extrusion containing an led light source. the lamp plays on...
3d_export
$5
one-eyed scary virus
...cinema, the body relief is formed by the standard extrusion noise. the eye texture is...
3d_export
$5
Spaceship - Galaxy Crusher
...with a more ominous twist. it has lots of extrusion and cubes and comes with a whopping 4k texture,...
3d_export
free
30 x 30 extrusion
... x 30 x 40.sldprt<br>30 x 30 x 50.sldprt<br>30 x 30 x 606.sldprt<br>the sketch.sldprt<br>30 x 30 x 40.stl
3d_export
$1000
bead triangle adhesive laminating machine
...a triangular rubber head with the shape required for extrusion the rear end of the extruder is also provided...
3d_export
$20
1600 Meltblown cloth production line set drawing CAD
...width of 1600mm. the steel structure frame, feeding host, extrusion screw, heating system, screen changer, metering pump, melting it...
3d_export
$20
GE TF34 Fan Blade and Nose Cone
...and appropriately sized fillet features are provided.<br>also, a threaded extrusion profile is provided on the fan blade component and...
turbosquid
$5
Cable Cover Extrusion
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Dual
3d_export
$49
LG L70 Dual Black 3D Model
... cellular 2g 3g ips lcd
lg l70 dual black 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl humster3d 103896 3dexport
3d_export
$49
Nokia 225 Red 3D Model
...3dexport nokia 225 cell phone mobile cellular 2g keyboard dual tft lcd red nokia 225 red 3d model download...
3d_export
$49
LG L65 Dual White 3D Model
...ouchscreen touch screen
lg l65 dual white 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl humster3d 103755 3dexport
3ddd
$1
Мобильный телефон Nokia Asha 210 dual-sim
...ual-sim
3ddd
nokia , телефон
profi 3д модель мобильного телефона nokia asha 210 dual-sim
3d_ocean
$15
Microsoft Lumia 535 Orange
...microsoft lumia 535 orange 3docean android cell dual lumia microsoft nokia phone sim smart windows - realistic,...
3d_ocean
$17
SMA's Dual Material Packs-Porcelain for Cinema 4D
...tion: this is my dual material series based on custom made hi-res 4k porcelain textures. the library contains 20 material. 10 ...
3d_ocean
$15
Element 3D - Microsoft Lumia 535 Green
...3d - microsoft lumia 535 green 3docean android cell dual lumia microsoft nokia phone sim windows - realistic, detailed...
3d_ocean
$15
Microsoft Lumia 535 White
...microsoft lumia 535 white 3docean android cell dual lumia microsoft nokia phone sim windows - realistic, detailed...
3d_ocean
$25
SMA's Dual Material Pack - Wood-S02 - Parquet C4D
...arquet description: here i present you with wood series 02 – parquet dual materials library for cinema 4d. all textures used a...
3d_ocean
$10
Modular Dungeon Set|Dual Teeth Wall Pack (8 of 20)
...ngeon set. (also has an all-in-one pack if you plan on buying them all) this dual teeth wall pack comes with a high quality lo...
Nozzle
cg_studio
$36
Gas nozzle3d model
...s nozzle3d model
cgstudio
.3ds .dxf .obj - gas nozzle 3d model, royalty free license available, instant download after purchase.
3d_export
$12
Oil Nozzle Gun 3D Model
...un petrol petroleum gas
oil nozzle gun 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl kiyomimaster 106298 3dexport
cg_studio
$5
Nozzle3d model
...l
cgstudio
.3ds .c4d .lwo .ma .max .obj .xsi - nozzle 3d model, royalty free license available, instant download after purchase.
3ddd
$1
ComLab 3 Way Bench Mounted Laboratory Mixing Set
...comlab laboratory outlets are supplied with a tapered tube nozzle and are assembled for each specific media type. the...
archibase_planet
free
Gas pump
...gas pump archibase planet gas pump fuelling nozzle filling station gas station gas pump n230814 - 3d...
3d_export
$36
Gas nozzle 3D Model
... 3d model
3dexport
gas pump nozzle dispenser filling station petrol fuel spout tank gun
gas nozzle 3d model tartino 1945 3dexport
3d_export
$29
Perfume Flacon Hugo XX Women 3D Model
...xx women 3d model 3dexport flacon perfume vray hugo nozzle glas glossy hq flavour fragrance flavor women men quality...
3d_export
$20
Icing Syringe v2 3D Model
...cake bake kitchen utensils tools kitchenware bakeware pump plunger nozzle culinary gravy food cooking equipment baker chef cook icing...
3d_export
$15
Sauce Bottles 3D Model
...bottles kitchen restaurant sauce ketchup bottle dispenser plastic squeeze nozzle squeezing container liquid chili tools utensils cap food table...
3d_export
$20
Icing Syringe 3D Model
...cake bake kitchen utensils tools kitchenware bakeware pump plunger nozzle culinary food equipment baker chef cook stainless steel icing...
Drive
3d_export
$99
Lancia Stratos std mat 3D Model
...auto rim vehivle sport vray rally photorealistic speed people drive championship italy italia italian munari lancia stratos std mat...
3d_export
$75
Audi R9 Prototype Car 3D Model
...r9 prototype car concept vehicle fast sport luxury r8 drive auto mobile automobileautomotive speed wheel photorealistic design futuristic audi...
3d_export
$129
BMW M5 2012 3D Model
...m5 2012 car vehicle transport speed sport german people drive wheel rigged photorealistic serie luxury f10 e60 sedan interior...
3d_export
$5
Bearings 3D Model
...y factory technics technology car auto rotation spare part machine driving metal nickel
bearings 3d model dmitry87 49638 3dexport
3d_export
$199
3D Models BMW concept pack 2 3D Model
...efficient dynamics zagato car vehicle speed sport german people drive wheel rigged realistic serie interior deutch cs 3d models...
3d_export
$49
Old bicycle 3D Model
...3d model 3dexport old bicycle bike classic classical wheel drive ride vehicle transport pedal saddle seat cycling vintage road...
3d_export
$79
Sega Megadrive 3D Model
...tage old retro photorealistic toy computer people play nostalgia classic cartridge
sega megadrive 3d model fabelar 29423 3dexport
3d_export
$10
USB Modem Alcatel One Touch X230 3D Model
...model 3dexport usb modem alcatel one touch x230 flash drive computer device memory usb modem alcatel one touch x230...
3ddd
$1
LEMA - Ocean drive
...lema - ocean drive
3ddd
lema
http://www.architonic.com/pmsht/ocean-drive-lema/1211648
3d_ocean
$85
Ferrari 488 Spider 2016
...automobile automotive avto cabrio car cars convertible design dream drive ferrari high hyper italy model photorealistic poly quality scuderia...
Extruder
3ddd
$1
Footrest
...footrest
3ddd
footrest , tom dixon
extruded footrest inspired by tom dixon
3d_ocean
$5
Neon Light 3d Alphabet Set A-Z
...ckground, camera, sweep and extrude effects. you can change light color and material color to make another scene if you want. ...
3d_ocean
$3
Espresso Cup
...espresso cup
3docean
a fully editable espresso cup with lathe and extrude objects.
3d_ocean
$10
Pattern
...pattern
3docean
extrude
national ornament
3d_ocean
$3
Christmas Ball
...clause cold cool fir flake freeze frozen funny happy merry red reflect santa snow white
pretty christmas ball with stars extrude.
3d_ocean
$5
United States national emblem
...us national emblem
high polygon model, poly modelling, not just displacement extruding. goot for 3d printing or wax\wood milling.
3d_ocean
$12
Director Chair
...5 high details modeling and textures most of the model are still extrude nurbz & splines and some pc are poly with hypernurbs
3d_ocean
$25
NFL logos pack
...o, afc logo and 3d digits). it was made from vector files with extrude nurbs tool. all logos are editable. poject has material...
3d_ocean
$12
Beautiful Planet Earth
...extruded geometry for more realism. all textures are 8000×4000 in size. object includes: 3 diffuse textures( you choose which ...
3d_ocean
$10
World Globe (political)
...also every countriy ,large closed seas and lakes are named and colored with diferent colours . this item can be used for prese...
Quad
3d_export
$22
Quad Shotgun 3D Model
...gun shot gun sniper machine gatling pistol handgun weapon game ready gameready
quad shotgun 3d model martialartist 24904 3dexport
3ddd
$1
Tandem Quad Wood Arm Caps and Legs_End Table Wood Legs
... tandem
http://www.sourceseating.com/
tandem quad wood arm caps and legs_end table wood legs
3ddd
$1
Stage Unit Trenomat Multi Quad 200x50
...i quad 200x50
3ddd
сцена
unit/module for creation of stages, floors. material included in fbx. unit is produced by trenomat gmbh.
3ddd
$1
The girl similar to Mandy
...mandy 3ddd кукла model girl-like character dean yeagle "mandy". quad only. all materials for v-ray render textures in resolution...
3d_ocean
$15
Modern Sofa
...in realistic sizes (centimeters) and proportions. all objects have quadpolygon geometry so you can apply another turbosmooth modifier...
3d_ocean
$29
Parrot Bebop Drone
...chopper dji dron game helicopter parrot-bebop-quadcopter-drone phantom propeller quad quadcopter radio recon remote toy parrot bebop drone .................................................................................... description:...
3d_ocean
$7
red bull can
...has been modeled with a clean topology bases on quad only. this pack...
3d_ocean
$19
Cassina Prive
...- article: 241 61 - unwrap uvw - all quad - poly count: 114 796 - created in 3dmax...
3d_ocean
$7
Wicker Basket Ikea Maffens
...cm polygons: 73 932 vertices: 73 984 geometry: polygonal quad only 4 textures...
3d_ocean
$22
Cassina Prive
...- article: 241 62 - unwrap uvw - all quad - poly count: 292 316 - created in 3dmax...
Single
3d_export
$12
Chair 3D Model
...living room dining wooden seating metal design couch office single seater mujlan chair 3d model mujlan 6838...
3d_export
$30
Highly detailed singlefamily house 6 3D Model
...n single family house building residential town city garage
highly detailed singlefamily house 6 3d model labmatic 21523 3dexport
3d_export
$149
North American P51D Mustang The Enchantress 3D Model
...p-51d 51d mustang fighter plane aircraft usaaf us airforce singleseat army military aviation bomber escort north american p51d mustang...
3d_export
$30
Highly detailed singlefamily house 8 3D Model
...n single family house building residential town city garage
highly detailed singlefamily house 8 3d model labmatic 21751 3dexport
3ddd
$1
Disegno Ceramica Neo
...тумба 730х265 арт. ne01100001 кран: perrin and rowe mimas single lever sink mixer...
3d_ocean
$89
Toyota Tundra Single Max 2013
...y, in real units of measurement, qualitatively and maximally close to the original. model formats: - *.max (3ds max 2008 scanl...
3d_ocean
$7
Glass Door Monoblock 005
...garage glass handle hinge hollow interior knob knocker peephole single solid trim open glass door — you may apply...
3d_ocean
$7
Glass Door Monoblock 008
...garage glass handle hinge hollow interior knob knocker peephole single solid trim open glass door — you may apply...
3d_ocean
$7
Glass Door Z 006
...garage glass handle hinge hollow interior knob knocker peephole single solid trim open glass door — you may apply...
3d_ocean
$25
GardenHouse2
...home house ivy low poly old water pump place single house small apartment spathiphyllum low poly garden house2 ;...