Thingiverse
Bow Trainer (Traditional Archery) by -Josh-
by Thingiverse
Last crawled date: 4 years, 1 month ago
The first Version of this trainer setup is started with this model from GrabCad (I'm likely going to try my hand at going from scratch later):https://grabcad.com/library/takedown-bow-grip-1, I don't want to take credit for their work.
I recommend printing this with 4-walls, and 4 top and bottom layers. So far ABS is far and away my favorite plastic for this, though PET-G would come in second. PLA worked, but I worry about it left in hot cars-etc..
This is meant for 6mm OD rubber, I have both 4mm and 3mm ID that has worked, please tie a large enough knot in the rubber.
USE AT YOUR OWN RISK
I do not know how your printer does or how you tied the knots, however I can tell you mine is plenty strong. The rubber will over course fail eventually, please watch your eyes.
This does take a larger printer, and I am more than willing to print and send one to you if you want, I'll look into shipping costs, etc..
I recommend printing this with 4-walls, and 4 top and bottom layers. So far ABS is far and away my favorite plastic for this, though PET-G would come in second. PLA worked, but I worry about it left in hot cars-etc..
This is meant for 6mm OD rubber, I have both 4mm and 3mm ID that has worked, please tie a large enough knot in the rubber.
USE AT YOUR OWN RISK
I do not know how your printer does or how you tied the knots, however I can tell you mine is plenty strong. The rubber will over course fail eventually, please watch your eyes.
This does take a larger printer, and I am more than willing to print and send one to you if you want, I'll look into shipping costs, etc..