Thingiverse
BOTW Link Shield by Malonejj24
by Thingiverse
Last crawled date: 5 years, 3 months ago
Designed the shield from BOTW to be printed on a small bed. Be sure not to print any of the dovetail surfaces ontop of support, the clearance will be off and it will not fit well together (without a LOT of sanding).
For the handle I would reduce the width 1 or 2%, the fit was almost too tight.
Hole sizes are for M10x1.5 bolts, yes they are large, yes I should have used smaller ones.
For the handle I would reduce the width 1 or 2%, the fit was almost too tight.
Hole sizes are for M10x1.5 bolts, yes they are large, yes I should have used smaller ones.