Thingiverse
Boosted Remote Ring - V1 and V2 by JakeMethner
by Thingiverse
Last crawled date: 4 years, 7 months ago
This design is in a testing phase and should not be considered a final model. Test at your own risk.
This is a Boosted Remote Ring for a Boosted Board V1 and V2 remote. With an O-Ring it easily keeps your fingers attached to the remote without having to use a lanyard.
Fill with 50% infill or higher. Currently being tested with these O-Rings. https://goo.gl/Djyr6P
Edit Log:
Screw hole adjustment is done.
Curvature has been improved.
Increased thickness and bevel.
Increase O-Ring diameter for a better fit.
This is a Boosted Remote Ring for a Boosted Board V1 and V2 remote. With an O-Ring it easily keeps your fingers attached to the remote without having to use a lanyard.
Fill with 50% infill or higher. Currently being tested with these O-Rings. https://goo.gl/Djyr6P
Edit Log:
Screw hole adjustment is done.
Curvature has been improved.
Increased thickness and bevel.
Increase O-Ring diameter for a better fit.