Thingiverse
Bodgie X by Octovir
by Thingiverse
Last crawled date: 3 years ago
So I got frustrated by my larger, complete redesign of my arducoper, and instantly fell in love with brucedjones's bodgie design. I also really want to do FPV so I redesigned the way the Aeroquad board mounts to allow for an X configuration. I did this by moving the arm mounting holes out about 1mm, So you can still choose a Plus configuration if you want.
The lower platform was designed extremely quickly as burn out was starting to set in here as well.. A quick GoPro mount was added to this and I had plans to make a quick AV transmitter mount, but booleans and maya weren't cooperating...
I have just rubber banded the RC rx to one of the arms for now, but may look into a more proper way to keep it on.. Maybe an upper cage to protect electronics and constrain wires?...
I have really only flown once so far.. about 3 minutes of hovering around while mosquitoes were trying to eat me..
It oscillates a little with the 1500mah batt and I had a few hops with a 2200 and it was really unstable, so It will need some PID tuning..
FPV electronics and Gopro may make things a bit heave, esp with a 2200mah batt..
Though holding in my hand at about 2/3 throttle I was showing about 10 amps coming out of the battery, which is a bit promising.. between 1/2 to 2/3 throttle seemed to be about hover position.. again only one flight and distractions..
The lower platform was designed extremely quickly as burn out was starting to set in here as well.. A quick GoPro mount was added to this and I had plans to make a quick AV transmitter mount, but booleans and maya weren't cooperating...
I have just rubber banded the RC rx to one of the arms for now, but may look into a more proper way to keep it on.. Maybe an upper cage to protect electronics and constrain wires?...
I have really only flown once so far.. about 3 minutes of hovering around while mosquitoes were trying to eat me..
It oscillates a little with the 1500mah batt and I had a few hops with a 2200 and it was really unstable, so It will need some PID tuning..
FPV electronics and Gopro may make things a bit heave, esp with a 2200mah batt..
Though holding in my hand at about 2/3 throttle I was showing about 10 amps coming out of the battery, which is a bit promising.. between 1/2 to 2/3 throttle seemed to be about hover position.. again only one flight and distractions..
Similar models
thingiverse
free
gopro mount fpv rig by everydaypotato
...t i could swap to may different rc's so i made a mount i could put my camera and vtx on that would fit a standard gopro mount
thingiverse
free
dual gopro mount for rc tank cover by everydaypotato
...gopro mount for rc tank cover by everydaypotato
thingiverse
i wanted to run a gopro and my gopro mount fpv rig so i remixed this
thingiverse
free
gopro mount and fpv camra by rorymace
...gopro mount and fpv camra by rorymace
thingiverse
a gopro and fpv mount for a hover craft
grabcad
free
GoPro quick release mount
...bcad
i broke my original mount, so i drew it and print it out with 3d printer. and it works perfectly!
...and its way cheaper ;)
thingiverse
free
QAV-S Johhny Fpv Gopro mount by frakkan
...heavier camera will stay on the drone. suggest print what is on my photos, because the factory gopro mount surely will not break.
thingiverse
free
Armattan Rooster/Chameleon GoPro Session mount by godFather89
...esign but i didn't want the jello proof part.
also added v2 with a bit more side protection (on the right side of the gopro).
thingiverse
free
Tubular Crossfire 2 quadcopter top and bottom plate extension by sal42na68
...% infill. so far they are coming out very strong and light. also printing brandon22 arms at 20% infill and they are also strong.
thingiverse
free
RC Speed Tank FPV Mod by sadkins1981
... tank, so i redesigned the front bumper to have a cut out for the camera, and a number of slots for zip ties to hold it in place.
thingiverse
free
Martian 2 - Runcam Split mount by joeostrander
...s the board directly behind the camera with 4 m3 bolts. i've flown it several times now and it seems to be working dandy. :)
thingiverse
free
articulating wall mount adapt to go pro mount by Aaronmm
...one.
wyze cam mount-- https://www.thingiverse.com/thing:4234744
adjustable wall mount-- https://www.thingiverse.com/thing:2448971
Bodgie
thingiverse
free
Bodgie stronger power layer by Ilkirius
...power layer by ilkirius
thingiverse
another power layer for bodgie.
need to be improved (like my english speaking capacities...)
thingiverse
free
Bodgie foot v2 by Ilkirius
...bodgie foot v2 by ilkirius
thingiverse
feet for thing:40497
need to be glued
thingiverse
free
Bodgie Emo Hobby 2204/14 arms by Ilkirius
...n of the arms, compatible with the brushless motor from emo hobby, model 2204/14
option :
bodgie motor wire protect : thing:45645
thingiverse
free
Bodgie Turnigy 1300 mAh battery support by Ilkirius
...port for bodgie
compatible with turnigy 20-30c 1300 mah (75x30x20)
need 2 x thing:40818 to be complete (feet)
need to be improved
thingiverse
free
Bodgie another battery mount by Ilkirius
...bodgie another battery mount by ilkirius
thingiverse
compatible with :
turnigy 3s 20c 1300 mah
hyperion 3s 35c 1800 mah
thingiverse
free
bodgie motor wire protect by Ilkirius
...motor wire protect by ilkirius
thingiverse
for the 2204/14 arms (thing:45644) : just a little piece added to protect motor wires
thingiverse
free
Bodgie foot by Ilkirius
...es (pico vers le haut ou le bas, fixã©s au dessus ou dessous du "testcagebottom"
so thanks to brucedjones and octovir !
thingiverse
free
Bodgie Arm for Turnigy 2730-1500 by Octovir
...mount small quad-copter motors. i have also designed an arm with holes to mount the motors with screws, but have not printed it..
thingiverse
free
Bodgy HOTAS by drjake
...oard key x 16 (don't know the model name)
electronics
arduino pro micro
mcp23017 gpio expander
4.7k resistor x 2
lots of wire
Octovir
thingiverse
free
Y6 Hexacopter by Octovir
...y6 hexacopter by octovir
thingiverse
a y6 hexacopter i designed and lasercut. first iteration
thingiverse
free
Dagger by Octovir
...;m not sure the best way to go about printing such a thing. he seemed pleased with the result though, so that's what counts..
thingiverse
free
Thin Object Clamp by Octovir
...e useful for other things..
this part was made with tinkercad. edit the part online at: https://tinkercad.com/p/acc031b096fb5321
thingiverse
free
icosahedron globe by Octovir
...ce for fusion 360 and parametric design. i've attached the fusion 360 file as well as the svg for cutting out of 3mm acrylic.
thingiverse
free
Copy of TimeLapse CamHolder by Octovir
... make it adjustable/modular.
this part was made with tinkercad. edit the part online at: https://tinkercad.com/p/acc031b096fb532e
thingiverse
free
iPad 2 Register/Point of Sale Stand by Octovir
...y parents recently started using the square app for their motel. inspired by the flipping stands at maker faire, i designed this.
thingiverse
free
Tricopter by Octovir
... my face again, it will cause less damage. :d
for reference see: http://www.rcexplorer.se/projects/tricopterv25/tricopterv25.html
thingiverse
free
Integrated Motor Mount/Frame Vertex by Octovir
...eefed up the mount and integrated it with the upper half of the vertex and all seems to be better now.. hooray rapid prototyping!
thingiverse
free
Grenade Container by Octovir
...the opening of the grenade body.
i got griped at for taking this into a public place.. i really didn't consider that either..
thingiverse
free
Extra Replicator Spool Holder by Octovir
...d potentially mount 6+ spools to a replicator.
this design is quite blocky and unrefined. i was in a hurry to add another color..