Thingiverse
BN-880 GPS/Compass and SMA Mount for TBS Source One by fraziern
by Thingiverse
Last crawled date: 4 years, 3 months ago
Mount for BN-880 GPS/Compass unit for back of TBS Source One FPV frame. With hole for SMA pigtail.
15 degree back tilt.
If you use this with INAV, you'll have to use the following CLI settings to properly set up compass alignment (this took me a while to get right, so hopefully it saves you some aches and pains):
set align_mag = default
set align_mag_pitch = 1800
set align_mag_roll = 150
set align_mag_yaw = 900
save
Print this upside down (with top against build plate) with supports.
15 degree back tilt.
If you use this with INAV, you'll have to use the following CLI settings to properly set up compass alignment (this took me a while to get right, so hopefully it saves you some aches and pains):
set align_mag = default
set align_mag_pitch = 1800
set align_mag_roll = 150
set align_mag_yaw = 900
save
Print this upside down (with top against build plate) with supports.