Thingiverse
BLX185 ESC Mount for Arrma 3s Typhon by resu13
by Thingiverse
Last crawled date: 3 years, 4 months ago
Description
These adapter plates allow you to mount the BLX185 ESC onto the ARRMA 3s Typhon without the requirement to lift the body (with e.g. the Kraton body mount parts) when using the BLX185 mount for 3s vehicles you can find on thingiverse as well.
The adapter plates and the BLX185 ESC are mounted between the motor and the stock receiver box. The power switch can be placed on the stock receiver box.
Please note that the motor size is then limited to 680mm.
Model files
SubPlate.stl – Being mounted at the bottom onto the existing holes in the chassis.
TopPlate.stl – Being mounted on top of the sub-plate where you finally can mount the BLX185 ESX.
Installation instructions
Based on the first image, the sub plate must be mounted onto the existing screw holes of the chassis between the motor mount and the receiver box using two M3x8 screws.
Then the top plate must be mounted onto the sub plate using two M3x10 screws.
Finally the ESC must be mounted onto the top plate using two M3x8 screws.
The ESC power switch can simply be mounted on its default position on top of the receiver box
Required parts
4x M3x8 screws
2x M3x10 screws
These adapter plates allow you to mount the BLX185 ESC onto the ARRMA 3s Typhon without the requirement to lift the body (with e.g. the Kraton body mount parts) when using the BLX185 mount for 3s vehicles you can find on thingiverse as well.
The adapter plates and the BLX185 ESC are mounted between the motor and the stock receiver box. The power switch can be placed on the stock receiver box.
Please note that the motor size is then limited to 680mm.
Model files
SubPlate.stl – Being mounted at the bottom onto the existing holes in the chassis.
TopPlate.stl – Being mounted on top of the sub-plate where you finally can mount the BLX185 ESX.
Installation instructions
Based on the first image, the sub plate must be mounted onto the existing screw holes of the chassis between the motor mount and the receiver box using two M3x8 screws.
Then the top plate must be mounted onto the sub plate using two M3x10 screws.
Finally the ESC must be mounted onto the top plate using two M3x8 screws.
The ESC power switch can simply be mounted on its default position on top of the receiver box
Required parts
4x M3x8 screws
2x M3x10 screws
Similar models
thingiverse
free
BLX185 ESC Mount for Arrma 3s Vehicles by suchtragedy
...rap around the esc then secure it accordingly. for best fit make sure to the face the motor wires to the outside of the vehicle.
thingiverse
free
Arrma BLX100 support for 3S BLX Basis by Nivekkeke
...ure because new style and probably new esc), it should work for all of them , when you are still using the arrma branded blx100 .
thingiverse
free
MAX10 (SCT) Mount For Arrma 4x4 / BLX by resu13
...unk screws to fit the plate below the esc
2x m3x16mm screws to mount the plate onto the default receiver box (instead of m3x12mm)
thingiverse
free
Arrma Granite Voltage Receiver & ESC Tray by mstrmold
...d tape to adhere your receive and esc to the printed plates. the trays allow for easy removal when you need to work on the truck.
thingiverse
free
Axial Capra Flatbed Plate by 3DtoRC
...mm
• there are two holes 25mm apart for mounting. the holes are 2.8mm, and tap perfectly with 3mm screws.
• recommend 100% infill
thingiverse
free
Arrma ESC Adapter Plate by TheFuzz1542
...round the mounting holes and i made all the holes with a slight oval shape to give a little forgiveness with printing tolerances.
thingiverse
free
Hobbywing Max6 ESC mount for Arrma 6s vehicles by suchtragedy
...of the chassis once fully installed.
**note: this mount also works with hobbywing max6 rebranded escs such as the hexfly hex6***
thingiverse
free
ARRMA TYPHON 3S BLX motor cables bracket by InspectorGdget
...screws what is for reciever box so just need screw it and put 4 stripes
ps.
sorry for my english ( its not my national language )
thingiverse
free
Mtroniks Switch Mount by Digi-Kitsamus
...tch for my mtroniks esc in my mardave mini stock.
i decided to print one to mount onto the chassis using an existing unused hole.
thingiverse
free
Axial SCX10 Switch Mount by Deepfat
...itch not being mounted. this clips between the chassis and the outrider. two small screws used to attach the switch to the mount.
Resu13
thingiverse
free
Money savingx box unicorn / Spardose Einhorn by resu13
...rdose mit einhorndesign und abnehmbarem deckel. der deckel klemmt fest genug, kann aber trotzdem mit etwas kraft geöffent werden.
thingiverse
free
Sodastream bottle holder / Flaschenhalter by resu13
...aschhalter for die sodastream plastikflaschen. ich habe diesen kreiert, damit wir sie nach dem waschen einfacher trocknen können.
thingiverse
free
Arrma Kraton 6s Mudguards for RPM arms by resu13
... being split when landing hard (see v2). i've not tested this version yet due to bad weather but will do as soon as possible.
thingiverse
free
Arrma 6S shock cap protector by resu13
...itional "long" version of the protector for the back to avoid the wing to be pulled beneath it when the car rolls over.
thingiverse
free
Arrma 6S shock composite ball by resu13
...arrma 6s shock composite ball by resu13
thingiverse
just a simple composite ball for the arrma 6s shocks.
thingiverse
free
Arrma 6S receiver box wire seal by resu13
...efault one of ara320604. created that one as my ordered receiver box was missing it.
the _thin version has a 0.2mm thinner slot.
thingiverse
free
Light box beauty & the beast remix by resu13
...o simply slide in the single blades and the slide everything together into the cover. you may glue it, but it's not required.
thingiverse
free
Reely New 1 Body Post Retainer by resu13
...e body posts.
simply print them and pull over the body posts. i recommend using some flexible material with a shore of approx 50.
thingiverse
free
Arrma 4x4 / BLX 3S Pivot Ball by resu13
...s pivot ball by resu13
thingiverse
a simple replacement for the default pivot balls. had no replacement so i created my own one.
Typhon
thingiverse
free
BLX185 ESC Mount for Arrma 3s Vehicles by suchtragedy
...switch. please note: this will not work with the typhon 3s due to it's low profile body (escs cannot...
thingiverse
free
Arrma Rear section - #AR310884 by Nivekkeke
...number for arrma vehicles used it on my arrma typhon 3s, but would also pass on ather models from...
thingiverse
free
Arrma Typhon 6S wider wing by abxsimtech
...id it was too narrow for his taste. i designed this one to be about an inch wider on each side while maintaining a race car look.
thingiverse
free
RC Wheel Balancer (uses Arrma 6s rear hub assembly) by suchtragedy
...(used in the 6s on-road infraction/felony/limitless and the off-road talion/typhonmojave): rear hub assembly: ar330193 rear wheel axle(8x36mm): ar310431 bearings...
thingiverse
free
Arrma typhon v1-5 wing mount by n0t49a1n
...ll tower designs
should be a good fit for most tower / wing combos
also it sit a little higher than normal more for my preference
thingiverse
free
Hobbywing Max6 ESC mount for Arrma 6s vehicles by suchtragedy
...found on the arrma 6s kraton, notorious, outcast, mojave, typhon talion, and senton only and will not work with...
thingiverse
free
Arrma Hoons Center Cap - 17mm by Cazanova
...hoons center cap - 17mm by cazanova thingiverse remixed typhon 3s wheel hex covers to work on hoons the...
thingiverse
free
Arrma Typhon 3S Front Shock Tower Cover by Cazanova
...va
thingiverse
one of my 1st 3d printing projects
should be best to be printed with tpu 95a
should work with other materials too
thingiverse
free
ARRMA typhon front vent scoops by avogev
... the inner shape from the arrma body on top of the fenders and glue from bottom. adds airflow in the shell for increased cooling.
Arrma
thingiverse
free
Arrma Infraction hingepin holder less toe rear by Rowster
...ma infraction hingepin holder less toe rear by rowster
thingiverse
hingpin holder rear front for the infraction, gives less toe.
thingiverse
free
Arrma louvers for the Infraction by Rowster
...arrma louvers for the infraction by rowster
thingiverse
arrma infraction front wheel louvers.
thingiverse
free
17mm hex for Arrma Senton 4x4 by Rowster
...17mm hex for arrma senton 4x4 by rowster
thingiverse
17mm hex for the arrma senton 4x4 so you can mount wheels with 17mm hex.
thingiverse
free
Arrma voltage antenna holder by masimplo
... cover broke from the base, so i designed this to go over the antenna wire. it is held into place with some glue or some bluetack
thingiverse
free
Arrma Voltage ESC base by masimplo
...ued the bottom of the esc to the top of this part and it feels really solid now, but can also be easily removed by unscrewing it.
thingiverse
free
Arrma voltage rear camber link by masimplo
...t the steering link and designed that here: https://www.thingiverse.com/thing:4632705 so i created this one as well just in case.
thingiverse
free
Arrma Voltage steering link by masimplo
...designed it using the other one as reference.
v1 is a loose fit (use if you have not calibrated your printer)
v2 is a tighter fit
thingiverse
free
Arrma Granite Servo Protector by MasonicFire
...he edge of this to hold better which means i can easily remove if needed (peel off).
printed with tpu to resist bumps etc better.
thingiverse
free
Arrma - Granite 4x4 BLX Shell Post by MasonicFire
...but was first print and had not file / smoothed etc, can easily be coated or made better but but a bash /.replace part it works.
thingiverse
free
BLX185 ESC Mount for Arrma 3s Vehicles by suchtragedy
...rap around the esc then secure it accordingly. for best fit make sure to the face the motor wires to the outside of the vehicle.
3S
3ddd
$1
Актуальный дизайн, комплект кофейный brazo
...входит: стул brazo xl, стол кофейный apriori, светильник brazo 3s вертикальный. сайт производителя:...
3ddd
$1
Lam Export - 1895 3s
...lam export - 1895 3s
3ddd
lam export
оправа: сусальное золото
3ddd
$1
NAVIA Patchwork Sofa 3S
...d820 x h785
price: hk$12800
color: red
sku: 1108010072006http://www.francfranc.com.hk/eng/product_details.aspx?id=4489
3ddd
$1
Набор мебели Art line
...d061-6h bf061-3 bf080 b026a b026 c036-1 t035-1 s031-1s s031-2s s031-3s ...
3ddd
$1
Светильники Luce Solara
...solara 3ddd luce , solara люстра luce solara moderno 8001/3s chrome/white производитель: lucesolara (китай) --высота, мм:1200 --диаметр, мм:710 количество...
archive3d
free
Shower 3D Model
...sanitary ware shower kludi fizz thermostat dual shower system 3s dn15 n271216 - 3d model (*.gsm+*.3ds) for interior 3d...
3ddd
$1
Cremasco vecchio veneto
...3ddd cremasco итальянские светильники cremasco серии vecchio veneto: люстра: 371/3smd-ce2 Ø 36 x l151 x h56 cm; бра: 385/1ap-ce2...
3ddd
$1
LuceSolara White 3000/3S
...л арматуры : металл
степень защиты : ip20
цвет арматуры : белый
тип крепления : накладной
цвет плафона : белый
цена: 9990 руб
3ddd
$1
Sicret KOM 3S
... комод
brw (black red white)
комод sicret kom 3s
высота 97,5 см
ширина 115,5 см
глубина 44,0 см
3ddd
free
Luce Solara 2010
...светильника коллекции «moderno» lucesolara 2010/1s e14 40w и lucesolara 2010/3s e14 40w материал: металл цвета: золото, латунь,хром цоколь: e14...
Esc
3ddd
$1
Remove Note Track Pro (AntiSifa)
...скрипта. работает в 3 раза быстрее. останавливается при нажатии esc актуально для сильно зараженных сцен. для тех, кто не...
3ddd
free
Смеситель Smeg MID5CR
...гибкая нейлоновая подводка, 2 по 350 мм аэратор функция esc - easy saving cartridge функция wsc - water saving...
3ddd
$1
Стойка для аэробических штанг
...стойка для аэробических штанг 3ddd аэробика артикул: esc21088 ...
3d_export
$15
ESP controller 3D Model
...esp controller 3d model 3dexport esp controller esc dsc electronic stability control vehicle car auto automotive safe...
thingiverse
free
Arrma Voltage ESC base by masimplo
...ued the bottom of the esc to the top of this part and it feels really solid now, but can also be easily removed by unscrewing it.
thingiverse
free
TEAM LOSI XX SERVO MOUNTS ESC TRAY AND SHORTY PLATE by fwdesign
...tly aligned and centered electronics.
for best results print at high infill and moderate speed, especially for those servo posts.
thingiverse
free
TEKNO ET410.2 Rear Guards by chschmit
...car. i have a mambax which is a large esc and doesn't allow the esc and transmitter to be...
thingiverse
free
Mini Variable Lab Bench Power Supply by andzer
...5.0mm pcb mount screw terminal block connector xt60 nylon esc connectors spdt on/off/on mini black 3 pin rocker switch...
thingiverse
free
DJI Phantom 2 Airframe Reborn by Brodo78
...i lengthened one of the motor wires to the esc just to ensure there was no tension on it....
thingiverse
free
RC Boat - Pump Jet Boat / 遥控船-喷射泵 by N7_Cat
...motor (50 grams), lipo (129 grams) (18650s are out), esc (28 grams), servo (9 grams), and receiver (6.5 grams)...
Mount
3ddd
$1
Vega flush mount lamp
...t lamp
3ddd
dimensions: 22.5"wx22.5"dx12"h
размеры: 58см х 58см х 31см
v-ray light included | v-ray light внутри
3ddd
$1
Currey & Company Balthazar
...quality of the glass elements. product name: balthazar ceiling mount dimensions: 21h x 18d x 18w number of lights:...
3d_ocean
$5
Rock_6
...rock_6 3docean mount mountin rock rocks stone rock_6….............1474.polygon. .1476.vertices. 4096 * 4096 texture....
3d_ocean
$19
Low Poly Hotel
...and flower pots, trees, brunches, street lights, trashcans, wall mountd air freshener, air conditioners, fire...
3d_ocean
$25
Low Poly Buildings
...storehouse/warehouse, one grocery/minimarket, flower beds and flower pots, wall mountd air freshener, air conditioners, air intake,...
3d_ocean
$5
rock_4
...rock_4 3docean low polygon mount mountin old rock rock stone rock_4…...............1419.polygon. .1421.vertices. 4096 * 4096...
3d_ocean
$5
mountain_9
...n_9…........................12560 polygon. ...12562 vertices. 4096 * 4096 texture obj , fbx , and blend format model. game ready.
3d_ocean
$25
Low Poly City Block
...and flower pots, trees, brunches, street lights, trashcans, wall mountd ...
3d_ocean
$5
Rock_3
...rock_3 3docean mount mountin rock stone rock_3…..............6048.polygon 6127.point. 4096*4096 texture. obj,fbx,blend format model....
3d_ocean
$5
Rock_2
...rock_2 3docean mount mountin rock stone rock_2…...............3196.polygon 3248.point. 4096*4096 texture. obj,fbx,blend format model....