Thingiverse
BLV Piezo Orion front plate remix - fitted for Twin blower(kinda)
by Thingiverse
Last crawled date: 5 years, 9 months ago
just fixed that the holes werent centered.
Added Ventilation holes. And paths for the belt.
Get the rest of the parts from Seblacasse :)
ps. to fit the twin blower front. you have to drill the holes down a bit as the fan is mounted a little lower than orginal. (holes in the front of the twin blower shield, you see what I mean what you try to mount it on the fan)
You also need to add 4mm spacing between the twin blower shield and carriage.
(same goes for the motor if you wish to Direct drive the PIezo orion)
Added Ventilation holes. And paths for the belt.
Get the rest of the parts from Seblacasse :)
ps. to fit the twin blower front. you have to drill the holes down a bit as the fan is mounted a little lower than orginal. (holes in the front of the twin blower shield, you see what I mean what you try to mount it on the fan)
You also need to add 4mm spacing between the twin blower shield and carriage.
(same goes for the motor if you wish to Direct drive the PIezo orion)