Thingiverse
Bluetooth Headphones
by Thingiverse
Last crawled date: 4 years, 3 months ago
Had a go at making my own Bluetooth headphones which I designed on OnShape. This version has the volume up and down buttons on the back not visible from the front. I printed everything at 100% infill (I thought maybe having more infill would mean more blocking of external sound but I cant be sure that worked) making sure that you have NO SUPPORTS for the headband because that is where you put the wires through.
I printed the cups face down (opposite to what is shown in the images) so there is a fair bit of support to remove when you're done printing. This was the only way I could get a smooth finish on the parts you see and meant less sanding. The headband laying on its side so there was no need for supports. The cushion and driver holder can go anyway you like because you don't see it after you attach the cushion. All at .2 layer height. You need to print the POWER SIDE, AUDIO SIDE, 2x DRIVER HOUSING and HEADBAND
Below is what I used as parts to get this all working.
*dayton audio 40mm speaker drivers (http://www.theloudspeakerkit.com/dayton-audio-ce38mb-32-1-1-2-mini-speaker-black-32)
*CSR8645 bluetooth chip from Aliexpress (https://www.aliexpress.com/item/32918680156.html?spm=a2g0o.productlist.0.0.18e87dd0ccKwtX&algo_pvid=5930dd66-486d-4061-8972-3daaa806198c&algo_expid=5930dd66-486d-4061-8972-3daaa806198c-4&btsid=766fac78-c467-40f0-b6a6-d4c50d9c54c5&ws_ab_test=searchweb0_0,searchweb201602_3,searchweb201603_52)
*Li-ion Battery Pack found at Jaycar (https://www.jaycar.com.au/spare-li-ion-battery-pack-to-suit-gt-4110-quadcopter/p/GT4113)
*DPDT power on/off switch (https://www.jaycar.com.au/sub-miniature-dpdt-pcb-mount-switch/p/SS0823)
*Hook up wire (https://www.jaycar.com.au/hook-up-wire-pack-2-metres/p/WH3025)
*tactile switch x2 for volume up and down (https://www.jaycar.com.au/3-5mm-spst-micro-tactile-switch/p/SP0602)
*hot glue (to stick the parts to the insides and secure the cups to the headband at whatever length fits your head)
*model glue (https://www.amazon.com.au/Modelling-Glue-Revell-Contacta-Professional/dp/B0187U3LMS/ref=sr_1_5?dchild=1&keywords=revell+contacta+glue&qid=1577087646&sr=8-5)
*paint of your choice (I used Dulux plastic primer spray and colours from Dulux range)
*sandpaper (different grits to get the surface nice and smooth before paint)
*soldering iron and solder
*lithium battery charging module (https://www.ebay.com.au/itm/Type-C-USB-5V-1A-18650-TP4056-Lithium-Battery-Charger-Module-W-Protection-Chip/362711194693?ssPageName=STRK%3AMEBIDX%3AIT&var=631869985071&_trksid=p2060353.m2749.l2649)
Bose replacement cushions (https://www.ebay.com.au/itm/Replacement-Ear-Pads-Pad-Cushions-for-Bose-QuietComfort-35-QC35-II-Headphones/163330189217?ssPageName=STRK%3AMEBIDX%3AIT&var=462599690279&_trksid=p2060353.m2749.l2649)
I did not necessarily buy items listed on Amazon or Ebay from those particular sellers. If you find it somewhere else then go for it. If you decide to make these, post them on here :)
Huge shout out to Shannonley https://www.thingiverse.com/shannonley. Check out his homebrew headphone website when you get a chance.
I printed the cups face down (opposite to what is shown in the images) so there is a fair bit of support to remove when you're done printing. This was the only way I could get a smooth finish on the parts you see and meant less sanding. The headband laying on its side so there was no need for supports. The cushion and driver holder can go anyway you like because you don't see it after you attach the cushion. All at .2 layer height. You need to print the POWER SIDE, AUDIO SIDE, 2x DRIVER HOUSING and HEADBAND
Below is what I used as parts to get this all working.
*dayton audio 40mm speaker drivers (http://www.theloudspeakerkit.com/dayton-audio-ce38mb-32-1-1-2-mini-speaker-black-32)
*CSR8645 bluetooth chip from Aliexpress (https://www.aliexpress.com/item/32918680156.html?spm=a2g0o.productlist.0.0.18e87dd0ccKwtX&algo_pvid=5930dd66-486d-4061-8972-3daaa806198c&algo_expid=5930dd66-486d-4061-8972-3daaa806198c-4&btsid=766fac78-c467-40f0-b6a6-d4c50d9c54c5&ws_ab_test=searchweb0_0,searchweb201602_3,searchweb201603_52)
*Li-ion Battery Pack found at Jaycar (https://www.jaycar.com.au/spare-li-ion-battery-pack-to-suit-gt-4110-quadcopter/p/GT4113)
*DPDT power on/off switch (https://www.jaycar.com.au/sub-miniature-dpdt-pcb-mount-switch/p/SS0823)
*Hook up wire (https://www.jaycar.com.au/hook-up-wire-pack-2-metres/p/WH3025)
*tactile switch x2 for volume up and down (https://www.jaycar.com.au/3-5mm-spst-micro-tactile-switch/p/SP0602)
*hot glue (to stick the parts to the insides and secure the cups to the headband at whatever length fits your head)
*model glue (https://www.amazon.com.au/Modelling-Glue-Revell-Contacta-Professional/dp/B0187U3LMS/ref=sr_1_5?dchild=1&keywords=revell+contacta+glue&qid=1577087646&sr=8-5)
*paint of your choice (I used Dulux plastic primer spray and colours from Dulux range)
*sandpaper (different grits to get the surface nice and smooth before paint)
*soldering iron and solder
*lithium battery charging module (https://www.ebay.com.au/itm/Type-C-USB-5V-1A-18650-TP4056-Lithium-Battery-Charger-Module-W-Protection-Chip/362711194693?ssPageName=STRK%3AMEBIDX%3AIT&var=631869985071&_trksid=p2060353.m2749.l2649)
Bose replacement cushions (https://www.ebay.com.au/itm/Replacement-Ear-Pads-Pad-Cushions-for-Bose-QuietComfort-35-QC35-II-Headphones/163330189217?ssPageName=STRK%3AMEBIDX%3AIT&var=462599690279&_trksid=p2060353.m2749.l2649)
I did not necessarily buy items listed on Amazon or Ebay from those particular sellers. If you find it somewhere else then go for it. If you decide to make these, post them on here :)
Huge shout out to Shannonley https://www.thingiverse.com/shannonley. Check out his homebrew headphone website when you get a chance.
Similar models
thingiverse
free
PSU box Constant Current/Voltage 0-50v 5A by Jono_corp
...screws m3 x 6mm self tapping
some cable to wire inside
2a fuse
some spade terminals / or solder directly to terminals
heat shrink
thingiverse
free
deskjet battery powered desktop fan by fergal_kelly
...p2t-panel-mount-vertical-slide-switch-6-pin-0-5a-50v-dc-/182523163731?epid=2114032596&hash=item2a7f3a7453:g:lhkaaoswpkfy6ioc)
3dwarehouse
free
Model Glue Pot Holder
...model glue pot holder
3dwarehouse
for holding tamiya thin glue and revell contacta pro glues
thingiverse
free
Runaway Replacement Headband by AdamoRobinson
...ou'll need:
2x 20mm m2 bolts
2x m2 nuts
the m2 nut traps along the band itself are for bolting a cushion to, once i model it.
3dwarehouse
free
Bluetooth Speaker V1.3
...ve radiators tps3116d2 class d 2.1 amp dayton lbb-5 battery board dayton lbb-5eb expansion board dayton lbb-5cl cable and led kit
thingiverse
free
BlueTooth audio receiver casing + battery powered by trescurieux
...r bank" module
the circuit has very low consumption (~ 20 ma), some circuit will shutdown if the current consumed is too low
thingiverse
free
GaPa Radio32 (KaRadio32) by yamaha_xg
...onverter-step-down-module-adjustable-3v-5v-16v-for-rc/221890985028?sspagename=strk%3amebidx%3ait&_trksid=p2060353.m2749.l2649
thingiverse
free
HandHeld Fan by fergal_kelly
...p2t-panel-mount-vertical-slide-switch-6-pin-0-5a-50v-dc-/182523163731?epid=2114032596&hash=item2a7f3a7453:g:lhkaaoswpkfy6ioc)
thingiverse
free
4th Axis with TailStock by alanpwood
...th-2-032mm-pitch-rubber-timing-belt-for-stepper-motor/391921345293?sspagename=strk%3amebidx%3ait&_trksid=p2060353.m2749.l2649
thingiverse
free
Battery Capacity Tester Drop Through Cover by oct0f1sh
...?_trksid=p2060353.m2749.l2649&sspagename=strk%3amebidx%3ait
i was lazy so you have to glue the capacity tester onto the part.
Bluetooth
3d_ocean
$16
Bluetooth handset
...ooth handset
3docean
bluetooth bluetooth handset concept handset headphone high poly modern music new
high poly bluetooth handset
turbosquid
$35
Bluetooth
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
USB-Bluetooth
...luetooth
3ddd
bluetooth
usb-bluetooth с прозрачным корпусом. камера и освещение выставлены. камера проанимирована на презентацию.
3d_export
$5
bluetooth card
...bluetooth card
3dexport
this is a simplified bluetooth card with which you can create cases
turbosquid
$2
Bluetooth Speaker
...royalty free 3d model bluetooth speaker for download as blend on turbosquid: 3d models for games, architecture, videos. (1281743)
turbosquid
$5
Bluetooth Speaker
...y free 3d model bluetooth speaker for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1336601)
turbosquid
$5
Bluetooth Speaker
...y free 3d model bluetooth speaker for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1336600)
turbosquid
$5
Bluetooth Speaker
...y free 3d model bluetooth speaker for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1336599)
turbosquid
$3
Bluetooth speaker
...y free 3d model bluetooth speaker for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1165662)
turbosquid
$19
Bluetooth Speaker
...odel bluetooth speaker for download as max, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1286177)
Headphones
3d_export
$5
headphones
...headphones
3dexport
ordinary headphones.. ordinary black headphones.
3d_ocean
$6
headphones
...headphones
3docean
computer headphones music
stylish headphones with leather lining
3d_export
$10
Headphones
...headphones
3dexport
headphones
3d_export
$5
headphones
...headphones
3dexport
headphones
3d_ocean
$8
Headphone
...headphone 3docean 3d model equipment headphone music 3d headphones with autodesk maya, 3d model, headphone, equipment,...
3d_ocean
$15
headphone
...headphone
3docean
audio cinema4d headphone
headphone max c4d obj model
3d_export
$5
headphones
...headphones
3dexport
they are golden headphones
archibase_planet
free
Headphones
...hones earphone headphone earphones
headphones panasonic rp wf810h n040111 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
headphones
...headphones
3dexport
lowpoly model headphones
3d_export
$26
headphones
...headphones
3dexport
low poly model headphones