BlueDot Quadcopter Frame by Sdconnell

Last crawled date: 2 years, 12 months ago

Hi Folks,
Check out the BlueDot Quadcopter Frame.
The frame is laser cut from heat treated aluminum alloy 6061-T6 that is anodized with a satin blue finish. Here are the basics:
Dimensions: 200mm by 170mm
Weight: 170g to 200g
Material: Anodized Aluminum 6061-T6 (2.5mm and 1.5mm thick)
Flight Controller Mount: 30mm to 45mm
Motor Mount: 11m to 19mm
Camera Mount: 32mm
Born and Raised in the USA
The frame can accommodate a range of standard parts. Here is a list of suggested equipment:
Flight Controller: KK, Flip MWC, Acro Naze32, MultiWii or Open Pilot CC3D
Motors: Tiger N1806-2300KV, RCX 1804-2400KV or Sunny Sky 2204-2300KV
Propellers: 5x3x2 or 5x4.5x2
Camera: FatShark PilotCAM or Sony 600TVL Super HAD CCD
Video Transmitter: Immersion RC 5.8Ghz 600mW Audio/Video Transmitter
Speed Controller: HK 12A BlueSeries or RTFQ 4-in-1 12A ESC
Battery: Turnigy Nano-Tech 1300mAh 3S Lipo
The BlueDot frame can be purchased for $30 here:
http://www.bluedotquad.com/
I'm a nerd...so, I named the frame after the Pale Blue Dot photograph. The iconic photograph of the planet Earth was taken by the Voyager-1 spacecraft at the edge of the solar system from a record distance of 6 billion kilometers. Earth is clearly visible in the photograph as a fractional blue pixel against the vastness of space. NASA took the image at the request of Carl Sagan (American astronomer, astrophysicist, cosmologist...the man).