Blue Yeti USB Microphone vibration damper by Simpo 3d model
Warning. This content is not moderated and could be offensive.
m4
3dmdb logo
Thingiverse
Blue Yeti USB Microphone vibration damper by Simpo

Blue Yeti USB Microphone vibration damper by Simpo

by Thingiverse
Last crawled date: 4 years ago
This is a vibration damper for the Blue Yeti USB Microphone series https://www.amazon.de/Blue-Yeti-USB-Mikrofon-Silber/dp/B002VA464S/ref=as_li_ss_tl?ie=UTF8&qid=1532036561&sr=8-1&keywords=Blue+Yeti&linkCode=sl1&tag=simpo-21&linkId=ba933fa831f221aec6e849d7fc5f44d5. The rubber band I used came along with the desktop fixation from Eastshining (I bought it on amazon https://www.amazon.de/Blue-Yeti-USB-Mikrofon-Silber/dp/B002VA464S/ref=as_li_ss_tl?ie=UTF8&qid=1532036561&sr=8-1&keywords=Blue+Yeti&linkCode=sl1&tag=simpo-21&linkId=ba933fa831f221aec6e849d7fc5f44d5). You can use the desktop fixation also without the vibration damper. For the outside part support structures are only need on the base plate (I think I used support structures at angles over 75°degree). For the inside part support structures should be used everywhere. Infill should be 100% for the outer part to avoid fatigue failure. Tips are highly appreciated :)

Tags