Thingiverse
BLTouch for LulzBot Taz 6 with ITWORKS3D extruder (obsolete, for reference only) by Narosenberg
by Thingiverse
Last crawled date: 4 years, 6 months ago
Important note: This project is fairly out of date now. The Taz 6 is no longer being sold, the BLTouch is at version 3 (not compatible with firmware for version 2), and Marlin itself has moved way beyond this version.
If you want to view this as a conceptual starting point, fine. But unless you have all of the old stuff to use, I urge readers to look elsewhere. Time marches on!
==============================================================
Users of the LulzBot Taz 6 printer are sometimes frustrated by the autolevel function. In short, it requires a totally clean nozzle in order to make electrical contact with the pads at the corners of the bed. This doesn't always work, even with extra cleaning.
The BLTouch is a better way to autolevel the bed. Using the bracket provided here it attaches to the carriage of the printer. The height of the plunger may be accurately adjusted with the two cap screws.
A demonstration of the unit in action is available here: https://youtu.be/xx_Ge_LO5CE.
A document that describes the process of updating the printer is here: https://drive.google.com/file/d/1jZ3FvadJdqG82v1T-xWEx0wQrOXSWvyV/view?usp=sharing.
Source code for the Marlin firmware is here: https://drive.google.com/file/d/1o0k2JgCzzwgFXIxjTZeTh8jFts_xyFdy/view?usp=sharing
Startup code for your slicer is here: https://drive.google.com/file/d/1mUHtg7q28uJ14hNW4dYbxTwh5GNhdHMw/view?usp=sharing
Of course you do this at your own risk, I can't be responsible for problems or damage you may incur.
If you want to view this as a conceptual starting point, fine. But unless you have all of the old stuff to use, I urge readers to look elsewhere. Time marches on!
==============================================================
Users of the LulzBot Taz 6 printer are sometimes frustrated by the autolevel function. In short, it requires a totally clean nozzle in order to make electrical contact with the pads at the corners of the bed. This doesn't always work, even with extra cleaning.
The BLTouch is a better way to autolevel the bed. Using the bracket provided here it attaches to the carriage of the printer. The height of the plunger may be accurately adjusted with the two cap screws.
A demonstration of the unit in action is available here: https://youtu.be/xx_Ge_LO5CE.
A document that describes the process of updating the printer is here: https://drive.google.com/file/d/1jZ3FvadJdqG82v1T-xWEx0wQrOXSWvyV/view?usp=sharing.
Source code for the Marlin firmware is here: https://drive.google.com/file/d/1o0k2JgCzzwgFXIxjTZeTh8jFts_xyFdy/view?usp=sharing
Startup code for your slicer is here: https://drive.google.com/file/d/1mUHtg7q28uJ14hNW4dYbxTwh5GNhdHMw/view?usp=sharing
Of course you do this at your own risk, I can't be responsible for problems or damage you may incur.