Thingiverse
BlackOpal UL6 by BlackOpal
by Thingiverse
Last crawled date: 3 years, 1 month ago
Ultralight 6 Inch by BlackOpal
Design Intentions:
The frame is designed around a 4 mm thick base plate and 1.5 mm thick top and camera plates. This design uses four (4) 25 mm standoffs and eight (8) M3 Button head socket screws. (4 x 6 mm and 4 x 8 mm)
It is designed for use with a 20 x 20 mm stack. Hole diameter is M2 (Machine to M3 if required)
Camera plates suit nano sized cameras (14 x 14 mm)
The camera plate slot on the base plate is a pocket 2.5mm in depth and NOT a thru-hole. Machining this as a thru-hole will not affect the build however, only aesthetics.
Motor spacing is 12 x 12 mm with M2 screw holes.
With 4 mm base plate = approx 43.7 g. With 5 mm base plate = approx 49 g
Design Intentions:
The frame is designed around a 4 mm thick base plate and 1.5 mm thick top and camera plates. This design uses four (4) 25 mm standoffs and eight (8) M3 Button head socket screws. (4 x 6 mm and 4 x 8 mm)
It is designed for use with a 20 x 20 mm stack. Hole diameter is M2 (Machine to M3 if required)
Camera plates suit nano sized cameras (14 x 14 mm)
The camera plate slot on the base plate is a pocket 2.5mm in depth and NOT a thru-hole. Machining this as a thru-hole will not affect the build however, only aesthetics.
Motor spacing is 12 x 12 mm with M2 screw holes.
With 4 mm base plate = approx 43.7 g. With 5 mm base plate = approx 49 g
Similar models
thingiverse
free
BlackOpal UL6 by BlackOpal
...etics.
motor spacing is 12 x 12 mm with m2 screw holes.
with 4 mm base plate = approx 43.7 g. with 5 mm base plate = approx 49 g
thingiverse
free
Nema 17 Motor Mounting Bracket
...inch 6-32 machines screws and nuts should work as well
also note: you can use shorter (20 mm) length screws for two of the holes.
thingiverse
free
Ender 3 Raspberry Camera Mount by PhilREngineering
...asher
1 x m4 nut
for connecting the camera with the camera mount top
4 x spacer sleeve
4 x m2 x 12 screw
4 x m2 washer
4 x m2 nut
thingiverse
free
Fatshark Camera Mounts (4 types) for the Atom RX122 by MichaelHaineault
...
4 x m2 screw holes + 1 center m3 hole to secure the mount on the atom rx122 frame
the fatshark camera is press fit into the case
grabcad
free
Metric Screws from M2 x 2.5 to M2 x 20
...s
the available dimensions are : m2 x 2.3 / m2 x 3 / m2 x 4 / m2 x 5 / m2 x 6 / m2 x 8 / m2 x 10 / m2 x 13 / m2 x 16 / m2 x 20
thingiverse
free
Creality CR-5 Pro - BTT SKR MINI E3 V2.0 support plate by FlorianKinder
...x) m3*8 screws (attach the plate to the chassis)
5x m3*12 screws (controller)
4x m2*12 screws (raspberry)
4x m2*12 screws (relay)
3dwarehouse
free
Stepper Nema 14 + Pololu Supoport + 4 x (DIN 7380 screw M3 x 6 mm)
... 14 + pololu supoport + 4 x (din 7380 screw m3 x 6 mm)
3dwarehouse
stepper nema 14 + soporte + 4 x (din 7380 tornillo m3 x 6 mm)
grabcad
free
4 6 8 10 12 14 16 mm collet & mill stand for small milling machines
...llet & mill stand for small milling machines
grabcad
4 6 8 10 12 14 16 mm collet & mill stand for small milling machines
thingiverse
free
oscilloscope DSO 112A magnet holder
...oscope dso 112a magnet holder
thingiverse
2 x magnet diametr 12 mm thickness 4 mm with hole 4 mm
2 x m4 x 8 mm countersunk screw
thingiverse
free
4 6 8 10 12 14 16 mm collet & mill stand for small milling machines by Imura_Industries
...r small milling machines by imura_industries
thingiverse
4 6 8 10 12 14 16 mm collet & mill stand for small milling machines
Ul6
thingiverse
free
BlackOpal UL6 arm protectors by stackola
...blackopal ul6 arm protectors by stackola
thingiverse
arm protectors for the ul6 by blackopal
thingiverse
free
BlackOpal UL6 by BlackOpal
...etics.
motor spacing is 12 x 12 mm with m2 screw holes.
with 4 mm base plate = approx 43.7 g. with 5 mm base plate = approx 49 g
3dwarehouse
free
Celestion UL6
...ouse
celestion ul6 is a 3way, 8ohm 40watt hifi speaker from the 1970's #celestion #hifi #loudspeaker #speaker #speakers #ul6
Blackopal
thingiverse
free
BlackOpal UL6 arm protectors by stackola
...blackopal ul6 arm protectors by stackola
thingiverse
arm protectors for the ul6 by blackopal
thingiverse
free
BlackOpal UL6 by BlackOpal
...etics.
motor spacing is 12 x 12 mm with m2 screw holes.
with 4 mm base plate = approx 43.7 g. with 5 mm base plate = approx 49 g
thingiverse
free
BoltRC BlackOps V2 Gopro Session mount by ZsolteeFPV
...ame.
it goes from 30degrees to 45degrees. rotate it to make the mount set on his side on the printbed and print it with supports.
thingiverse
free
Boltrc Blackops Front LED holder by kestrel253
... small zipties through the holes on each side of the led holder.
use with caution - this design has not been tested or printed.
thingiverse
free
BoltRC 210 Race BlackOps RX & VTX antenna mount by ntthhtl
...ce / blackops.
vtx antenna moved to top.
versions with sma connector nut "hollow" and with middle part "hole"
thingiverse
free
BOLT Blackops V2 Go Pro Session Mount by boltrc
...s to something longer, circa 14-16mm.
the rear screws, use nylon nuts or drill the holes out to m4.5 and use inset nuts.
thanks
thingiverse
free
Boltrc Blackops Arm Mounted LED Holder by kestrel253
...round the arms and through the upper and lower notches of the mount.
use with caution - the mount has not been tested or printed.
thingiverse
free
Bolt 210 SMA, LED and antenna holder (possibly BlackOps v1) by sebsx
...ack standoffs and has cutouts for sma, 3mm antenna tubes at 90 degrees horizontal and enough space to double side tape a led bar.
thingiverse
free
BoltRC 210 Race / BlackOps RX & VTX antenna mount by MeatG
...nnas to inside the tubes and fill with hot glue.
-vtx antenna is mounted with a pigtail
print with 20-100% infill and no support.