BIX tool for ethernet by eki_yu 3d model
3dmdb logo
Thingiverse
BIX tool for ethernet  by eki_yu

BIX tool for ethernet by eki_yu

by Thingiverse
Last crawled date: 4 years, 2 months ago
This is a tool to insert ethernet wires into an BIX patch block.
This is NOT a 110 tool.
The print does not require support.
The 100% infill print takes about 1.5 M of the 1.75mm filament.
The tool worked fine with 20% infill.

Tags