Thingiverse
Birdhouse Stronger Pegs by malakid
by Thingiverse
Last crawled date: 4 years, 5 months ago
I love meisernator's two-color birdhouse, but before I was able to use it the aligning pegs were breaking off in the holes. With these modifications, you can pull the front off for cleaning without breaking off the pegs.
I re-designed the front with holes to accommodate separately printed pegs. And pegs for the holes. Insert the pegs in the holes and add some glue. I used CA (superglue).
Please print the pegs horizontally - lying flat on the bed - for the most strength. Also, print meisernator's perch stick (Vogelhaus_zweifarbig_Stoeckchen.stl) horizontally, as well.
I also recommend printing the pegs and the perch 100% infill.
I re-designed the front with holes to accommodate separately printed pegs. And pegs for the holes. Insert the pegs in the holes and add some glue. I used CA (superglue).
Please print the pegs horizontally - lying flat on the bed - for the most strength. Also, print meisernator's perch stick (Vogelhaus_zweifarbig_Stoeckchen.stl) horizontally, as well.
I also recommend printing the pegs and the perch 100% infill.